|
Originally Posted by stainless
(Post 3212442)
ask them what they think about running 16.25's vs 16.5 diameter. Thats what i've got on my boat, and it runs real nice, just need more pitch.
We ran a set of 16 x 38's but they were on the limiter at like 122. Didn't have any 16.25's & the 16.5's seem to perform nicely so looks like I'll stick w/ them until I have some other setup to test. |
Originally Posted by stainless
(Post 3171129)
My guess would be 16.25x37 5 blade Herings , spinning in, and you'll be good to go!:ernaehrung004:
|
Originally Posted by stainless
(Post 3212452)
pretty close!
|
Running video from testing on lake norman. It should open in a new window.
http://www.performance-images.com/ph...96_LYarT-L.jpg |
Thanks for taking the time to come out Fri, I know you were headed out of town. Was that the first or 2nd pass?
|
Originally Posted by Swede
(Post 3213841)
Running video from testing on lake norman. It should open in a new window.
|
Boat looks Great, sounds bad a$$!
|
Should sound very familiar!! Not often I get to see / hear my own boat at speed.
|
great fly-by clip!!
|
2 Attachment(s)
Hoping to get out this weekend & do some back to back testing w/ these tapered nose cones.
May have the opportunity to run a few sets of Merc props as well just to see if the boat reacts any different. |
| All times are GMT -5. The time now is 03:50 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.