![]() |
Here's a link to a video Hering sent me of a 200hp Outboard running 100mph. Pretty cool to see what is & isn't in the water at speed.
I'm going to attempt to get a video of my ILMOR Indy drives in action. http://www.facebook.com/video/video....d=146415149606 |
That is an awesome video.:coolcowboy:
|
I tried the same thing, but forgot about all the water coming out of the tailpipes:
Ilmor 725/Indy - the business end. I'll save it at high-res next time... |
Originally Posted by C_Spray
(Post 3229012)
I tried the same thing, but forgot about all the water coming out of the tailpipes:
Ilmor 725/Indy - the business end. I'll save it at high-res next time... |
Yep. GoPro HD. Just used their suction mount on the deck. Did you get a chance to test anything today?
|
Another video from this weekend with C-spray as co-pilot.
http://www.performance-images.com/ph...33_iscHV-L.jpg |
Dave,
Thanks for taking the time to come out yesterday! |
Mercury Props & Nose Cone Testing
Testing Day 1 Sat 10/15- 2 people, 2/3 fuel, 50-70 deg (warms up quick), windy 1' chop. No visible outdrive video, poor cam location.
Run 1- Baseline w/ Hering 16.5 x 37 SCL's & stk nose cones. 3000rpm harmonic vibration, 65-95 hop, good acceleration but difficult to make use of w/ the hop, settles down at 100mph, top speed 130@ 6000-6050rpm level to -1 Neg trim Run 2- Merc 16.5 x 37 CL's & stk nose cones. 3000rpm harmonic vibration, 65-95 hop, good acceleration but difficult to make use of w/ the hop, settles down at 100mph, top speed 130@ 6000-6050rpm, likes level to +1 pos trim. Run 3- Merc 16.5 x 39 CL's stk nose cones. 3000rpm harmonic vibration, 65-85 hop, settles down a little sooner, top speed 133@ 5900-6000rpm, likes level to +1 pos trim. Testing Day 2 Sun 10/16- 3 people, 2/3 fuel, 60-70 deg (warms up quick), calm/flat. (since there was no real performance gain or noticeable advantage to the Merc props I performed all Day 2 testing w/ the Hering 37’s SCL’s for consistency purposes which have been the all around top performers to date.) Run 1- Same as Run 1 baseline from Sat, no difference in performance but captured some video w/ stk nose cones (see below) Run 2- Hering 16.5 x 37 SCL’s w/ pointed nose cones & video (see below), no noticeable difference time to plane, 3000rpm harmonic vibration remained, porpoised same 65-95mph but boat felt very edgy, light & unsettled @ 110mph+. I wasn’t comfortable trying to take it past 120mph. (I shared this w/ Bob Teague & he said he noticed no difference on the Eliminator & nor should I have b/c once it’s out of the water it’s out of the water) Nose cone vids below, tried several mounting locations even 2 cameras at one time but unfortunately lots of tunnel spray & tailpipe water interference. Best when watched in full screen, cones come into view intermittently especially coming off throttle, drag cursor to FF thru the clip. http://www.youtube.com/watch?v=GPKe2O9XgDQ Stock nose cone video Sunday Run 1 http://www.youtube.com/watch?v=9KglqTe0-VU Pointed nose cone video Sunday Run 2 |
do they think they can fix the harmonic vibration at 3k?
|
If you trim it up a little more, can you pick up any speed/rpm's with the 37's ?
I'm still thinking you should try some 16.25 x 38's |
| All times are GMT -5. The time now is 03:50 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.