Side Air vents for engine compartment??
#3
Registered
iTrader: (1)
Is that really a Nortech with WalMart Vents
I would upgrade them, some of the ones in the below link should have the same size/screw pattern.
http://www.eddiemarine.com/store/car...ts&search=vent
I would upgrade them, some of the ones in the below link should have the same size/screw pattern.
http://www.eddiemarine.com/store/car...ts&search=vent
#6
Charter Member # 55
Charter Member
EMI is the only company that I have found that makes them the exact same size as the Attwood vents, unless you go with custom made like BYC offers.
http://www.eddiemarine.com/store/car...&p=12233&c=125
http://www.eddiemarine.com/store/car...&p=12233&c=125
#7
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
EMI is the only company that I have found that makes them the exact same size as the Attwood vents, unless you go with custom made like BYC offers.
http://www.eddiemarine.com/store/car...&p=12233&c=125
http://www.eddiemarine.com/store/car...&p=12233&c=125
#8
Registered
Thread Starter
Join Date: Jan 2008
Location: Lake George NY
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
http://www.eddiemarine.com/store/car...&p=12214&c=125
Went with the upgraded aluminum to match the paint. Thanks for all the suggestions. Will be here Friday. Thanks Eddie Marine and for all the suggestions.
Went with the upgraded aluminum to match the paint. Thanks for all the suggestions. Will be here Friday. Thanks Eddie Marine and for all the suggestions.
#10
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
you are correct, just wondered why they wouldnt incorporate such an important safety consideration. Not much point running the blowers if the "potential fumes" are not being properly exhausted.