Livorsi Mega Race Series Guages
 

How hard is it to install a new mega race series guage in place of an old style screw style back. What are the color code of the 4 wires on the Wire Harness with these guages?

I've been wondering the same thing, and I'd think it's pretty easy.

It's much easier probably to work w/ the small connector to attach to the existing dash wiring and then plug into the gauge than to try to screw down the wiring to a whole gauge. Depends on how long the dash wiring is and how tight the space.

they are pretty easy to work with in the installs i have done with them which has been 3 or 4 new boats....

only thing i do is ditch the 12" pigtail and crimp on wires that are long enough to go where i want them to go as well as changing the signal wire to whatever color the guage is for like tan for temp etc....

color code is as follows
Black = Ground
Purple = 12v Key on Power
Blue = Dash lighting
Green = Signal from sender (this is the one i like to change the color to something a little more fitting

heres a 30 skater dash i just did recently using them....

http://i177.photobucket.com/albums/w...x/DSC00270.jpg

http://i177.photobucket.com/albums/w...x/DSC00273.jpg

http://i177.photobucket.com/albums/w...x/DSC00239.jpg


here is a 30 Superboat CC i just finished with them as well....

http://i177.photobucket.com/albums/w...5-19135025.jpg

http://i177.photobucket.com/albums/w...5-19165343.jpg

http://i177.photobucket.com/albums/w...5-06155138.jpg

if your doing a complete rerig of a dash then making your own length pigtails is the way to go....if your refitting then the 12" standard tails will probably come in handy IMHO......

Very nice

Livorsi stuff is nice.

Opps

What are you a super hero? :D

Very clean rigging. What shop are you out of?