Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Technical ? converting Bravo to a #6 drive,....Input please (https://www.offshoreonly.com/forums/general-boating-discussion/236879-technical-converting-bravo-6-drive-input-please.html)

RMPRam 08-15-2010 03:02 PM
Originally Posted by cougarman (Post 3182919)
Gary,

Haven't had a moment to call yet.

So if you subtract 8.500" from 17 13/16 then the engine is 9.3125" farthur forward correct?


Thanks to everyone else for your imput also.


Jon
Within 1/4", that should be correct.

CcanDo 08-15-2010 04:57 PM
We have a set of drill fixtures for # 6's . The fixture has collets that were placed using CAD/CAM, all you do is bolt the fixture to the transom, using the old holes and drill through the collets.

You may want to consider a thicker transom for rigidity. If so, longer gimbal studs will make the drill fixture even more appreciated.

cougarman 08-15-2010 09:59 PM
Originally Posted by RMPRam (Post 3182932)
Within 1/4", that should be correct.


Great thanks

Jon


All times are GMT -5. The time now is 02:25 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.