PARKER RABE

does any body know what to use to polish 3/4 canopies, there very hard to see thru , and have a haze on them ... do i use a high speed buffer , with compound? ive never worked on any ...any help would be great THANKS

skaterdave

http://www.novuspolish.com/

RunninHotRacing163.1

Novuspolish works great and wett sanding & buffing will make them look like new again
good luck

PARKER RABE

what grit sand paper ? 80

tzrider

iTrader: (-1)

80 Yikes, no no no. more like 1500

Slug-ger

Are they polycarbinate, or lexan? There is a huge diff. in material, polycarbinate is almost impossible to polish due to burning thru the layers. You can sand them & clear coat them for long term appearance.

Hustler40

Might want to call Skater. Last time i was out there they had tons of those, and with everyone going with wrap around windshields, they might give you a deal on a new set.

RunninHotRacing163.1

1500/2000/2500 grit paper & a 3000 pad

Dueclaws

Try Texstars http://www.texstars.com/
They manufacture the original f-16 canopies. I believe that CcanDo used them to refinish theirs: http://www.offshoreonly.com/forums/g...oration-9.html
"The canopies had been set to the original manufacturer (TEXSTARs) to be reground and coated back to original."

If you don't mind, please post your results after contacting them.

Lauderdaleboats

There is a kit called Micromesh which is ideal for the PC canopies