Oil Filters
Anyone know a place in the USA to buy FRAM RACING HP4 filters by the case?
I am paying over 20 bucks CDN in Toronto. I want them by the case. |
I'd look into Wix filters. In my opinion thye are much better than Fram.
http://www.wixfilters.com/filterlook...sp?Part=51060R Part Number: 51060R UPC Number: 765809129269 Principal Application: Racing Applications Only All Applications Style: Spin-On Lube Filter Service: Lube Type: Full Flow Media: Paper Height: 5.170 Outer Diameter Top: 3.600 Outer Diameter Bottom: Closed Thread Size: 13/16-16 By-Pass Valve Setting-PSI: None Anti-Drain Back Valve: Yes Max Flow Rate: 28 GPM Nominal Micron Rating: 61 Gasket Diameters Number O.D. I.D. Thk. Attached 3.444 3.100 0.260 Close Window |
Originally Posted by ar15meister
(Post 3189814)
Anyone know a place in the USA to buy FRAM RACING HP4 filters by the case?
I am paying over 20 bucks CDN in Toronto. I want them by the case. |
I agree Wix or K&N, Fram really isn't doing anything
|
Go to : www.Filter1.com Large Distributor of WIX Filters, cross that Fram number to a WIX Racing filter 51060R.
They will hook you up, part of our family's business, they do ship internationally, specialize in case quantity sales. |
Originally Posted by 07DominatorSS
(Post 3189869)
I wouldn't use a Fram if they paid me!
Cut them open and check out the guts if you think that they're all the same... They're not! |
Advanced Auto Parts stores usually stock 2 HP4 filters at a time for about $8.50 a piece
|
I was told the Fram racing filter is different. I will cut both open and take a look.
Doug |
You should defintely be using WIX racing filters (or even the regular WIX filter). They are by far the best for our boats. Fram is not in the same hemisphere.
|
thanks guys. The engine guys told me the HP4 Fram Racing was fine to run.
I used to run WIX Racing. |
All times are GMT -5. The time now is 11:39 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.