![]() |
Originally Posted by Whipple Charged
(Post 3214873)
Well, each time we've had an issue so its never been run at full capacity. It went 169mph at Havasu over year ago, with 1250hp, but port motor was down 20+ fuel psi so god only knows what power it had and how it lived through that and the Powerboat test! In Jax, with the motors at 1350, we went 172mph before the trans blew which was only a few miles from the start.
Needless to say, its gonna be faster :drink: |
Originally Posted by 30ctsutphen
(Post 3214882)
thats just a stupid price for a turbo engine making that HP.
Said it before and I'll say it again there are ALLOT of guys who can make more HP with turbos for less money and still be relaible. Please dont judge turbos on that engine and its cost. While its a bad azz package its designed for people who have more money than brains IMO |
Originally Posted by 30ctsutphen
(Post 3214882)
thats just a stupid price for a turbo engine making that HP.
Said it before and I'll say it again there are ALLOT of guys who can make more HP with turbos for less money and still be relaible. Please dont judge turbos on that engine and its cost. While its a bad azz package its designed for people who have more money than brains IMO |
Its good to see that it lasted one pull on the dyno.
Now on to more important things like RELIABILITY. How long will this engine(s) last at (I'll give away 100hp) 1700hp? |
Originally Posted by AppSysCons
(Post 3214844)
Back in the day,
someone told me it was a reference to duration 3/4 of 360 degrees, and you get 270 degrees someone else told me it was a reference to 3/4 of an inch lift, 0.750 as you said someone else told me it was a refefence to 3/4 of a full race cam, something that was hot, but streetable Looks like that is what is in Dustins :evilb: :drink: |
Originally Posted by AppSysCons
(Post 3214844)
Back in the day,
someone told me it was a reference to duration 3/4 of 360 degrees, and you get 270 degrees someone else told me it was a reference to 3/4 of an inch lift, 0.750 as you said someone else told me it was a refefence to 3/4 of a full race cam, something that was hot, but streetable |
I tell you what..... I for one am happy that all these guys constantly push the limits of these engines in a offshore marine application. this is how we learn and progress is made for all us . Congrats to all that are trying to advance this sport.
|
Originally Posted by CAFE
(Post 3215305)
I tell you what..... I for one am happy that all these guys constantly push the limits of these engines in a offshore marine application. this is how we learn and progress is made for all us . Congrats to all that are trying to advance this sport.
|
Originally Posted by 55thunder
(Post 3214506)
Hey wiseass, I have two street cars making more power than that heap.. pipedown..
I wasn't hackin on your junk... |
Originally Posted by Catmando
(Post 3215317)
I only see one wiseass in this thread and it's not Dustin Whipple. Your street racing punk pals are callin' you.
Shouldn't you be spending your golden years enjoying life, instead of talking smack to someone just because they weren't floored by his results... Jeez! |
| All times are GMT -5. The time now is 06:51 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.