Sick Stinger

iTrader: (23)

Im looking to build a controller to do 2 things.
1. Kick a realy over at a 130F and kill it at 165F. It must be a digital read out style.
2. Have a second function on a timmer set to kick a relay for a pre set ampunt of time then shut off. LED lights as it is in kicked on and out once off would be needed.
If some ne can show me how to build one that would be great or knows pf where I can buy something and tweek it to my needs is fine also.
-Mike

KNOT-RIGHT

mike input ouput controller comes to mind.
http://www.hcs1.calls.net/hcs_field_...ontroller.html

We may be able to do it with time delay relays aswell.



Stop by and explain to me what your trying to achieve
I may be able to help....Dont forget the corona

Sick Stinger

iTrader: (23)

Gerry something like this but with a Digital temp read out. It has the purge LED light on it that lets you know when its purging. Check the You tube vid to see what i mean.
http://www.cumminsforum.com/forum/al...rge-timer.html
-Mike

Sick Stinger

iTrader: (23)

This is how he build it but im not that good with electronics so I dont think id be able to build it with out a schematic or a step by step sheet on it. Also i was looking at this
http://cgi.ebay.com/ws/eBayISAPI.dll...:X:AAQ:US:1123

Wobble

adjustable fan switch controller for auto radiator application should work.

Sick Stinger

iTrader: (23)

Looked into that but the temps are to high for my need. has to be 130-165 temps start around 160 and range to 220
-mike

whoya

iTrader: (1)

Not sure if you want to play with some circuits.
If you change some of the resistor values this might work.
If you make two circuits with two different relays one should turn on other relay can disconnect at 165.
http://www.circuit-finder.com/catego...-relay-circuit