Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Ilmor 725's & Indy's!! (https://www.offshoreonly.com/forums/general-boating-discussion/240847-ilmor-725s-indys.html)

wrinkleface 10-15-2010 12:14 PM

Ilmor 725's & Indy's!!
 
Who has'm??? the good, bad & uglies??? Hours??????????????????????????????????????

C_Spray 10-15-2010 08:48 PM

Single setup in a 28' Batboat, love everything, just sorting out the prop to settle the boat down. Great customer support.

dkwestern 10-15-2010 08:59 PM

Watcha doin Wrink??

frogger1403 10-16-2010 10:45 AM

Sold a single setup in a 255 Hustler Cat. Great package, great people at Ilmor.

Too low hours to tell more detail

phragle 10-16-2010 10:48 AM

REpowering wrink???

JIMKID Motorsports 10-16-2010 07:05 PM

so far so good is what i have heard

wrinkleface 10-18-2010 03:05 PM


Originally Posted by dkwestern (Post 3231640)
Watcha doin Wrink??


Originally Posted by phragle (Post 3231910)
REpowering wrink???

try'n 2 get George into trouble!!!:party-smiley-004:

C_Spray 10-18-2010 03:07 PM

There are 80+ packages out there somewhere. Who else has 'em????

SS930 10-18-2010 03:17 PM

Serious coin, but a lot better comb than the rip-off Merc products, IMO. Also, owning two Viper's (a TT and track car) I can tell the V10 is as solid as a rock, can take a serious beating, and can make insane amounts of power.

If I were buying new, this would be the way I'd go... or with surface drives.

wrinkleface 10-18-2010 03:34 PM


Originally Posted by C_Spray (Post 3233202)
There are 80+ packages out there somewhere. Who else has 'em????

I sure did not know that # but yeah, where is everybody???

wrinkleface 10-19-2010 07:14 AM

bada bump!!!OMG, does anybody have 700's & NXT's!!!:daz:

C_Spray 10-20-2010 08:43 AM


Originally Posted by wrinkleface (Post 3233221)
I sure did not know that # but yeah, where is everybody???

About half of them are in Europe, as near as I can tell...

wrinkleface 10-22-2010 02:00 PM

:confused:

NASCAT 10-22-2010 02:36 PM

Wrink,

Pleased to date but barely 15hrs on them. Keep in mind I have GEN3 710 ILMOR's retrofitted w/ the new INDY drive. WAY MORE RELAIBLE PACKAGE than the combination I had but then again packages were limited options back then.

In my case I've added 250-300lbs, now spin a tranny & substantially larger gears, shafts & propellers w/ a higher gear ratio electively & didn't lose any speed. Had I stuck w/ the taller ratio my guess is I'd have gained both reliability & speed.

Still tinkering!!

wrinkleface 10-22-2010 03:23 PM


Originally Posted by NASCAT (Post 3236296)
Wrink,

Pleased to date but barely 15hrs on them. Keep in mind I have GEN3 710 ILMOR's retrofitted w/ the new INDY drive. WAY MORE RELAIBLE PACKAGE than the combination I had but then again packages were limited options back then.

In my case I've added 250-300lbs, now spin a tranny & substantially larger gears, shafts & propellers w/ a higher gear ratio electively & didn't lose any speed. Had I stuck w/ the taller ratio my guess is I'd have gained both reliability & speed.

Still tinkering!!


Originally Posted by OCM (Post 3236311)
Here's some Video of our stockings SC32. Its powered by 725 Ilmors and indy's.

http://www.youtube.com/watch?v=lwjHdkWdwOs





Tim
oregoncustommarine.com

Thanx, keep'm come'n!!!


All times are GMT -5. The time now is 09:03 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.