Upholstery/powder coating in MD, VA or DC
 

Anyone know of good upholstery or powder coating shop in tri state area.
Thanks in advance

Couple of those shops in Glen Burnie. On Crain Hwy. Not sure of the names but I used to have a business within a few blocks and would have herd if they did wrong. Especially being a boater.

http://www.ascoweb.com/
(703) 368-9922
Ask for James Sejd; owner, OSO member, and professional racer.
He knows his stuff. He's a great guy, and I'd trust him with any of my work.

There is a guy in Beltsville, Steve Wissoker, House of Powder. Has done a fair amount of stuff for people I know and they are real happy with his work. I have some stuff going to him this winter too if I get off my azz and get it apart :lolhit:

443-336-2105

Got a guy in Fredericksburg VA that does it. I'll get his number for you. He's on here, owns a Fountain named "up for Repo". Screen name Jpzaluski. shoot him a PM. Real name is Jason

I hate to say this but James is the man.

Fandango....In Hollywood Md on Commerce la. Ship Point Marchine did some powder coating for me once. Its been a while. Its close to you, maybe worth a shot. No upholstry work just powder coat.
If you talk to James Sejd....just mention Seltzers name. That will be good for at least 200% mark up.

I'm sure you have a few shops closer, but we can handle anything up to 26' you may have. I'm a boater myself, I'll give you my cell and shop number... Jason @ Advanced Coating Solutions in Fredericksburg VA

Shop: 540-898-9730, Cell: 540-273-0669

Feel free to call me on my cell if I can help you.

Thanks to all. It seams that a talented vinyl guy is hard to find????

Again thanks.

offshoredrillin had his Tiger's interior redone somewhere near Annapolis/Baltimore. Check with him on the interior work.

Brian, thanks. Tim Stevens did his and he is out of business.

Ed

We have a shop in Richmond:
http://www.customautotop.com/
I've never had any work done by them though. A friend is having a Mastercraft completely redone by them as we speak.

There is also another one on the southside of Richmond that I can't recommend. They used to be great, but after the owner's passing, the management has gone downhill.

I am in NJ if that helps... for powder coating that is

+1

Steve has done a bunch of stuff for me. Good work, reasonably priced, no BS....and he lives two blocks from me. :D

[QUOTE=Sydwayz;3263202]We have a shop in Richmond:
http://www.customautotop.com/
I've never had any work done by them though. A friend is having a Mastercraft completely redone by them as we speak.

Small job that Custom Auto Top did for me. (Throttle pod) I built the box and he covered it.

http://i1082.photobucket.com/albums/...ttlepod005.jpghttp://i1082.photobucket.com/albums/...ttlepod004.jpg

You should have just left the boat in Florida!

We can take care of any of that stuff at the AT Factory, and we have winter season storage & water delivery as well.

Their is a shop in Waldorf MD, called Ace upholstry, he is on 925. Dont know much about him, a lot of street rod guys use him. He reskinned a motor cover for a friend and did a good job. There is a shop on Chancellors Run rd. Never had any work done their, just delivered alot of vinyl to him. Always had boats sitting around. Place wasnt much too look at though.

Walker's Upholstery
22568 Chancellors Run Road, Great Mills, MD 20634-2409

i used walkers about 7 years ago to recover a sunpad. The price was right and the job was satisfactory. i'd use them again for a small job, but i'm not sure I'd trust them with a big project. it's basically run out a single car garage.

Walkers is ok for the easy stuff, but can't get close to logos and stuff that requires tight curves. Thanks to all though.

Don't mess around, haul that thing down to Jim @ PPI in Florida. I don't think that there is much competition for them when you want the best!!

www.ppi-fl.com