Link and help needed, Custom engine paint
 

Hey all,
Need a link to custom engine paint colors.
I cant find anyone to save my life.
was looking for either Magenta or Purple metallic paints for my engines and other miscelaneous brackets and such.
Anyone help me on this?
I want to get all my ducks in a row before I leave on my honeymoon on saturday.

Thanks
Jason

try house of color brand. they have a nice candy selection you put over a base color and then clear or they have some prett nice base colors that look great when cleared alone. i just painted mine w/ their paint for the second time and have been pleased. i went w/ a pavo purple on acces and a planet green for the motor/ and used duponts chroma clear w/ high soilds.

.

This is House of Color Pavo Purple base with a magenta near candy top coat.

Here you can see the base color between the fins with the candy color on the sides.

Jay, call me. I'll hook you up. Ask DEBREEZ OSO
GEO
(360)431-3691 or E mail [email protected]
My pleasure

Damn Cord, that is the color !!!!!
Geo, Ill call you once I settle in and find out what happened to my back up (decided to flake out on me last night)
Thanks
Jason

Yup any good eurathane. Prep the chit out of it and you will be fine :D:D

Ahhhh Jon,
Should you not BE SANDING RIGHT NOW??????????
:D

Just kidding, how goes it my man?
Whats going on?
Yeah get these engines yanked right after I get back from honeymoon, get em rebuilt, probalby 3 week turn around to get them back and then reinstall em and GO OUT FUR A DRIVE!!!!

(at least until another huge problem surfaces right?)

Be positive and she will come together nicely
i hope
Jason

I was sanding last night right up to the point that it started to rain again!!!! I am doing the detail sanding now under the dips in the hull so it is slow work but I got the hardest one done on the one side and a little of the smaller one, so if I can get some more work in today after I am get off work work I hope to have that side basically done. Then off to the other side. :D:D:rolleyes: :rolleyes: :rolleyes:

Well with all this engine crap after all the gimbal crap I have decided to at least splash her a few times before I lay her up and start the sanding process and painting her as well.
I dont look forward to sanding a 30' hull with a 4 inch palm sander but like you my friend, depends how hard you want to play and how good lookin you want to be when you do it.

I feel your pain and just think, your almost there.
Keep pluggin away and hope this Damn Weather complies with your sanding and prepping plans
Good luck
Jason