Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   New to chicago area and offshore (https://www.offshoreonly.com/forums/general-boating-discussion/243354-new-chicago-area-offshore.html)

formula455 12-03-2010 03:45 PM
1989 pyhon vector 24ft
 
454 MAGNUM 350 HP, BRAVO ONE DRIVE, 592 HOURS SHOWN ON METER, THRU HULL EXHAUST W/ MUFFLER TIPS, SS PROP, DUAL RAM TABS, SKI EYE, ELECTRIC POWER ENGINE HATCH, COMPASS, DEPTH FINDER, COCKPIT AND MOORING COVER, DOCK LIGHTS, TANDEM AXLE TRAILER, ALUMINUM WHEELS, UPDATED WITH PAINT AND TIRES, CONSIGNMENT, see it at our Morris location,

sorry for the caps , I just copy and paste the add

MILD THUNDER 12-03-2010 04:04 PM
Originally Posted by formula455 (Post 3266344)
454 MAGNUM 350 HP, BRAVO ONE DRIVE, 592 HOURS SHOWN ON METER, THRU HULL EXHAUST W/ MUFFLER TIPS, SS PROP, DUAL RAM TABS, SKI EYE, ELECTRIC POWER ENGINE HATCH, COMPASS, DEPTH FINDER, COCKPIT AND MOORING COVER, DOCK LIGHTS, TANDEM AXLE TRAILER, ALUMINUM WHEELS, UPDATED WITH PAINT AND TIRES, CONSIGNMENT, see it at our Morris location,

sorry for the caps , I just copy and paste the add
Should be a 365hp if its a 1989 454mag. Good engines. Maintained and taken care of, I have seen them last 800+ hours. Easy to get 420-440hp out of them. They have forged crank, rods, and rect port hipo heads.

formula455 12-03-2010 09:49 PM
boat survey
 
any recomdations on who to do a survey and approx cost for a 24 ft

boatnt 12-04-2010 08:09 AM
I would think its too late for a survey since you allready bought the boat,no?

formula455 12-04-2010 09:19 AM
Originally Posted by boatnt (Post 3266680)
I would think its too late for a survey since you allready bought the boat,no?

I made a offer contingent on a run and a full inspection

boatnt 12-04-2010 10:06 AM
Originally Posted by formula455 (Post 3266730)
I made a offer contingent on a run and a full inspection
sorry,misread your 1st post.

formula455 12-04-2010 11:37 AM
Originally Posted by boatnt (Post 3266758)
sorry,misread your 1st post.
No you read it correctly. Im going to GSC on tuesday for a complete run through and inspection


All times are GMT -5. The time now is 05:52 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.