Stainless Marine 525 exhaust
#21
Registered
I have used the Hardin Big Tubes. I think they are the Hurricane's. I have a set that is now over 2 years old and going strong. They were about half the price of the CMI Big Tubes. So far I love them and would not hesitate to use them again.
Eddie
Eddie
#22
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Changing the CMI 525efi sweepers to a non -long tube header will loose some power on the 525efi and definitely some torque in the mid-range. You should look at CMI's new GEN-X replacement header for the 525efi these can be ordered in the same drilling and will not suffer the cracking problem that the 05-06 Merc 525 CMI headers do and should be a direct bolt in replacement. I have no expierence with the Hardin units and I hear they can be a good header, but it depends as you might want to research the Hardin headers here on OSO>
Best Regards,
Ray @ Raylar
Best Regards,
Ray @ Raylar
#23
Registered
Platinum Member
I would bet they would sell a larger quantity and recoup the initial cost rather quickly. Just look at how many are looking here for replacements.
#25
Registered
Platinum Member
I bet if Jerry would get 20+ people that wanted them ..he would do it . But not just to see if they would sell. IMO
I can only tell my expirience with SM and others..THERE IS NOT 1 OUT THERE, THAT IS AS RELIABLE AS SM AND THE CUSTOMER SERVICE IS A 10 ON A SCALE FROM 0-10 !!!!!
I can only tell my expirience with SM and others..THERE IS NOT 1 OUT THERE, THAT IS AS RELIABLE AS SM AND THE CUSTOMER SERVICE IS A 10 ON A SCALE FROM 0-10 !!!!!
#26
Registered
Platinum Member
#27
I bet if Jerry would get 20+ people that wanted them ..he would do it . But not just to see if they would sell. IMO
I can only tell my expirience with SM and others..THERE IS NOT 1 OUT THERE, THAT IS AS RELIABLE AS SM AND THE CUSTOMER SERVICE IS A 10 ON A SCALE FROM 0-10 !!!!!
I can only tell my expirience with SM and others..THERE IS NOT 1 OUT THERE, THAT IS AS RELIABLE AS SM AND THE CUSTOMER SERVICE IS A 10 ON A SCALE FROM 0-10 !!!!!
#28
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
my dry gen 2s are very loud on my 509 650hp motor louder than the 525 boats. gen 3s come in 4 1/2'' or 5''. the hardin marine headers look nice I bought a new pair for my 572 blower motor cause I got a great price, other wise I was getting the gen 3s 5''. my gen 2s I bought from a fellow race team in 1994 after 4 races he switch to cmi headers and pick up zero in speed from the cmi headers and wished he saved his money and kept the gen 2s. hope my hurricanes by hardin stay together there hugh.
Last edited by AIR TIME; 01-10-2011 at 07:38 PM.
#29
Registered
iTrader: (3)
I bet if Jerry would get 20+ people that wanted them ..he would do it . But not just to see if they would sell. IMO
I can only tell my expirience with SM and others..THERE IS NOT 1 OUT THERE, THAT IS AS RELIABLE AS SM AND THE CUSTOMER SERVICE IS A 10 ON A SCALE FROM 0-10 !!!!!
I can only tell my expirience with SM and others..THERE IS NOT 1 OUT THERE, THAT IS AS RELIABLE AS SM AND THE CUSTOMER SERVICE IS A 10 ON A SCALE FROM 0-10 !!!!!
#30
Geronimo36
Gold Member