Cruz-N-Thunder

I bought it. I'm at the 5mm. I have had a 32 BT since 2002. Engines will need freshening soon, lots of odds and ends, and a good bath. Otherwise pretty happy. Actually took it out that Monday. Now have spring fever real bad. Have the 32 for sale and 10000 poly. Also looking for a 17 or 18 poly or galvalift.

fountain4play

Congratulations that is a very good looking boat. Were over off of the 4mm and look forward to seeing you out running... Jim

twin screws

Can you post some pics, congrats?

baywatch

Congrats. I have had great luck in the past dealing with Dave Hotz and dock realty for lifts. I have both purchased and sold through them and had a very pleasant experience.

I used Jason at lake lift for installs and he did a great job and built me a nice transom platform for changing props and cleaning the transom.

Best of luck with the new ride and spring will be here before we know it.

redbud35

I have a 17.000# galvalift at the 19mm if you're interested.

Cruz-N-Thunder

Thanks to all. Definitely looking forward to spring. I am interested in the lift. PM me with exact details. Tanks, width, backin, etc. BTW that is Steve from Advance not me.

black thunder 46

Nice i am the 14mm if you r comming from the 5mm i am on the right side stop by this summer!!

FuelinAround

There hasalwaysbeen a bt section in classifieds... It's on my short list of boats.... There just is hardly never any for sale... An older one with trips that performance marine has had forever usually popsup occasionally. IMO these are one of the hardest boats to find for sale.

black thunder 46

If u r on the main channle dont get a back in i have used a pull in Econo for my 43bt and my 46bt

Cruz-N-Thunder

Will do and thanks for the invite!

Most of us other than the owner / dealers tend to hang on to them for quite a while. I've had my 320 since 02.


I can see your point as getting pushed around in the main channel while docking is tough. We are back in far enough (I hope) that I am gonna try the back in. For entry and cleaning I think it will be easier. Let me know if I'm missing something.