![]() |
Sorcerer Skater
1 Attachment(s)
I just came across these pictures i took from 2001 or 2002 Smoke On The Water Poker Run
|
That boat sounds awesome! Actually, awesome is an understatement!
|
Originally Posted by dykstra
(Post 3309757)
That boat sounds awesome! Actually, awesome is an understatement!
|
Cool!
Saw that boat at LOTO a few years back and that sound will never be forgotten! It always started up really early and it didnt matter where you were at at TanTarA, you were wide awake when it lit. Best alarm clock money can buy! |
Originally Posted by VortechSS
(Post 3309820)
Cool!
Saw that boat at LOTO a few years back and that sound will never be forgotten! It always started up really early and it didnt matter where you were at at TanTarA, you were wide awake when it lit. Best alarm clock money can buy! |
I wish there were some way I could have The Sorcerers' sound as my ringtone. :lolhit:
Just the baddest, most raw sounding boat I've EVER heard :cool: |
Originally Posted by BLee
(Post 3309877)
I wish there were some way I could have The Sorcerers' sound as my ringtone. :lolhit:
Just the baddest, most raw sounding boat I've EVER heard :cool: |
Video?
nice looking boat.:coolcowboy: |
Originally Posted by Perlmudder
(Post 3309881)
whats the website for the engine builder? it shouldn't be that hard to do :drink:
|
Originally Posted by Perlmudder
(Post 3309881)
whats the website for the engine builder? it shouldn't be that hard to do :drink:
I see they changed the sign over Petes shop next F/X engines in Mokena Il. This was on my Matco Tool Route. Jim :drink: |
Originally Posted by Perlmudder
(Post 3309884)
Seems the audio on the website has been disabled....? =(
Yeah, unfortunately they don't have it on there anymore. Thanks anyway man! :ernaehrung004: |
Originally Posted by thumper038
(Post 3309887)
http://www.sorcererboating.com/racec...s/products.htm
I see they changed the sign over Petes shop next F/X engines in Mokena Il. This was on my Matco Tool Route. Jim :drink: |
Originally Posted by BLee
(Post 3309897)
Yeah, unfortunately they don't have it on there anymore. Thanks anyway man! :ernaehrung004:
if you can capture the audio from the site you can easily make it an mp3 and change the ringtone. http://www.sorcererboating.com/index.htm http://www.sorcererboating.com/images/new.htm |
Originally Posted by RunninHotRacing163.1
(Post 3309912)
F/X is Bob Sweenies place
Remember I used to deliver to all of Mokena I 80 from LaGrange to the river on Collins Street East side Joiliet that is, then to I 55 Used to be my stomping ground street racing before Amp Theater. Sauk Trail and Rigeland. Good ole days Know a few people:drink: Tell Bob and Pete and that goofy guy building Chassies next door I said Hi. !!! If walls could talk |
Originally Posted by offshoredrillin
(Post 3309913)
just listened to it, you have to go to it in IE, it wont play through mozilla.
if you can capture the audio from the site you can easily make it an mp3 and change the ringtone. http://www.sorcererboating.com/index.htm http://www.sorcererboating.com/images/new.htm |
I sent them an email asking for the original sound clip from the website... maybe they will reply?
|
Originally Posted by thumper038
(Post 3309918)
Ya think !:lolhit:
Remember I used to deliver to all of Mokena I 80 from LaGrange to the river on Collins Street East side Joiliet that is, then to I 55 Used to be my stomping ground street racing before Amp Theater. Sauk Trail and Rigeland. Good ole days Know a few people:drink: Tell Bob and Pete and that goofy guy building Chassies next door I said Hi. !!! If walls could talk the race car chassis bldr next door is J.C. real cool cat , and we did alot of street racing on Ole Ridgeland ave b4 they built the Tweeter center ..our SNAP-ON tool guy was George for the old shop on St francis rd . i have a bunch of VIDS of the dyno pulls with Rod ,Pete & they flew Orcino in from Havazoo to run the dyno there on dvds have to see if the kidz know how to gettem on here . |
Originally Posted by RunninHotRacing163.1
(Post 3309950)
small world BIG Daddy :eek:
the race car chassis bldr next door is J.C. real cool cat , and we did alot of street racing on Ole Ridgeland ave b4 they built the Tweeter center ..our SNAP-ON tool guy was George for the old shop on St francis rd . i have a bunch of VIDS of the dyno pulls with Rod ,Pete & they flew Orcino in from Havazoo to run the dyno there on dvds have to see if the kidz know how to gettem on here . I thought I told you who I was Lived on 135 and Parker for years went to Oak Lawn H.S. Saw The Sorcerer engines every week. Orcino's old shop where Tony's Trans is now, tried to buy the overhead gantry but Tony like's it!!! Small world Drag the car up to Greatlakes Dragway before 66 and your times were back before you. Love the blocked throttle got some of Marty Belckies Money that way:evilb: Gave him 3 the bust and let him spray :eek: Still took his money cause he was going of the times at the track:lolhit:Will try to post picture of that night Tommy always took pictures glad no one took his camera:eek: |
Orcinos old shop at Rt -30 & schoolhouse ,next to Triplex Marine :lolhit: thank goodness he left New Lenox and headed West :evilb: I think he still has Franky 10Xs motors :angry-smiley-038:
well you did a great job of Hijacking Boatmes thread |
1 Attachment(s)
Summer 0f 1989
|
I had the clip of Sorcerer as my ring tone a while back, but it sounded like crap on whatever phone I had at the time. You couldn't even tell what it was.
I'd like to try it again with my iPhone - I'm sure it would sound better. |
somebody has got to have a video :boat::boat:
|
Originally Posted by Perlmudder
(Post 3309936)
I sent them an email asking for the original sound clip from the website... maybe they will reply?
http://www.sorcererboating.com/download/RUMMeeee2.wav |
Originally Posted by Perlmudder
(Post 3309936)
I sent them an email asking for the original sound clip from the website... maybe they will reply?
|
Originally Posted by RunninHotRacing163.1
(Post 3319534)
well Josh ???? I'm hearing crickets chirping :lolhit:
|
|
I filmed the video that has the flyby soundtrack in 2001. I gave the video to Rod about a year later, and it ended up on his website. We filmed it in December on the Mississippi River in Dubuque. Rod and Rick from Arneson were in the boat, and they were haulin the mail. Had to winterize my boat twice that year.
|
Originally Posted by madhatter42
(Post 3319547)
now thats a sound to wake up to :eek: |
Originally Posted by bleek
(Post 3319571)
I filmed the video that has the flyby soundtrack in 2001. I gave the video to Rod about a year later, and it ended up on his website. We filmed it in December on the Mississippi River in Dubuque. Rod and Rick from Arneson were in the boat, and they were haulin the mail. Had to winterize my boat twice that year.
|
Originally Posted by madhatter42
(Post 3319547)
Thanks for sharing, but the one that was on Rods website had both engines idleing not just the one. It was a sound that you'll never forget. I used to play it at least once a month during the winter months just to get a rush. Can anyone find the original sound from the website ??? And Yes Big Daddy, I would pay money to meet up with Orsino back in his old neighborhood again. He would'nt have to worry about a trip back west. :angry-smiley-038: |
Originally Posted by 10x
(Post 3320224)
Thanks for sharing, but the one that was on Rods website had both engines idleing not just the one. It was a sound that you'll never forget. I used to play it at least once a month during the winter months just to get a rush.
Can anyone find the original sound from the website ??? And Yes Big Daddy, I would pay money to meet up with Orsino back in his old neighborhood again. He would'nt have to worry about a trip back west. :angry-smiley-038: |
bleek, you ever hit the LeClaire cove? Looks like ur right across the river. :drink:
|
Rod Tschiggfrie has built himself a diesel pickup now with a PSI blower and twin turbochargers. Check out the Feb 11 issue of Diesel Power Magazine, PG. 93
Google "Blowermax" and you'll find more info. The thing is making 80+lbs of boost and he's trying for 2000hp! The article says the PSI is "a remnant of Rod's offshore boat racing days." |
Originally Posted by JasonSmith
(Post 3320411)
Rod Tschiggfrie has built himself a diesel pickup now with a PSI blower and twin turbochargers. Check out the Feb 11 issue of Diesel Power Magazine, PG. 93
Google "Blowermax" and you'll find more info. The thing is making 80+lbs of boost and he's trying for 2000hp! The article says the PSI is "a remnant of Rod's offshore boat racing days." FYI, he is using a Lysholm R980 blower, not the PSI. |
Originally Posted by Coolerman
(Post 3320422)
http://www.dieselpowermag.com/featur...max/index.html
FYI, he is using a Lysholm R980 blower, not the PSI. |
Originally Posted by Coolerman
(Post 3320422)
http://www.dieselpowermag.com/featur...max/index.html
FYI, he is using a Lysholm R980 blower, not the PSI. |
Originally Posted by JasonSmith
(Post 3320438)
220. 221. Whatever it takes.
|
Originally Posted by 10x
(Post 3320224)
Thanks for sharing, but the one that was on Rods website had both engines idleing not just the one. It was a sound that you'll never forget. I used to play it at least once a month during the winter months just to get a rush.
Can anyone find the original sound from the website ??? And Yes Big Daddy, I would pay money to meet up with Orsino back in his old neighborhood again. He would'nt have to worry about a trip back west. :angry-smiley-038: |
| All times are GMT -5. The time now is 02:30 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.