Offshoreonly.com - imco -1 to imco -3

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - imco -1 to imco -3 (https://www.offshoreonly.com/forums/general-boating-discussion/246703-imco-1-imco-3-a.html)

27Fountain

01-31-2011 12:35 PM

29 SST Reading that post I would think you did all that on Sunday and that was a picture of you finished product. Not how it looked when I locked the gate

2Slow4me

02-01-2011 11:33 PM

Quote:

Originally Posted by 29 sst (Post 3312014)

Just swapped my -2 to -3"s on sunday. All u have to do is cut a notch in the upper and put a rubber bushing on the Imco cavitaiton plates, looks factory.http://i384.photobucket.com/albums/o...g?t=1296491161

What happens without a cavitation plate?

Since it is above the water @ speed, what does it acctualy do?

A.O. Razor

02-02-2011 09:04 AM

Quote:

Originally Posted by 2Slow4me (Post 3313712)

What happens without a cavitation plate?

Since it is above the water @ speed, what does it acctualy do?

Helps you get on plane.

29 sst

02-02-2011 03:03 PM

Quote:

Originally Posted by 27Fountain (Post 3312105)

29 SST Reading that post I would think you did all that on Sunday and that was a picture of you finished product. Not how it looked when I locked the gate

Lucky for Me I also have a key to that gate and went back to work.

Griswald

05-19-2012 10:33 AM

Quote:

Originally Posted by 29 sst (Post 3312014)

Old thread....

Would you happen to have any additional pictures on this modification to the upper?

All times are GMT -5. The time now is 05:36 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page