Apache Owners Beware...This one runs 120 in 4 footers!
#42
Registered
Join Date: Dec 2002
Location: Bucyrus, Ohio
Posts: 6,654
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Did anyone notice where it shows max speed of 135 and cruising speed of 100?
You guys are really gonna eat your words and look like a bunch of asses if this turns out to be Reggie and his new venture.
You guys are really gonna eat your words and look like a bunch of asses if this turns out to be Reggie and his new venture.
![Party Smiley 004](/forums/images/smilies/party-smiley-004.gif)
#47
Registered
Join Date: Apr 2009
Location: Englewood, OH
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
#48
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Dear Seebold 21 Owner,
I’m quite interested in your high performance boat. I have a modified Bayliner Capri 186 that served me well over the years and I too have modified it extensively. The original 4 cylinder Mercruiser with Alpha drive has been replaced with a Flux Capacitor hooked to a Warp drive. Since I’m an experienced fabricator, I also added a custom built Whup Ass injection system that I estimate has added at least 3000 HP. According to my original Bayliner speedometer, I’m now running 347 MPH. Better yet, I’ve found that I’m actually going fast enough to skip over the top of virtually any sea condition short of the perfect storm.
With all of the added horsepower, as you might guess, I too have had to modify the hull somewhat. My first modification was to add 37 steps to the hull to lessen drag. (As you might guess this was a bit difficult since all modifications were done with the boat sitting on a roller trailer in my apartment parking lot.) I also added several additional stringers and bulkheads made of Unobtainium to handle the added stress. Due to the unique properties of this material though, the boat is now actually lighter than air and has to be tied down to the trailer to prevent it from blowing away.
I could go on for hours as to the other modifications I’ve made to this boat, but quite honestly, I need a new challenge. Your boat – although significantly slower than mine – sounds like it’s much more of a chic magnet. That’s become a much higher priority in my life since mom said I have to move out, I’d like to talk to you about a possible trade. Interested?
I’m quite interested in your high performance boat. I have a modified Bayliner Capri 186 that served me well over the years and I too have modified it extensively. The original 4 cylinder Mercruiser with Alpha drive has been replaced with a Flux Capacitor hooked to a Warp drive. Since I’m an experienced fabricator, I also added a custom built Whup Ass injection system that I estimate has added at least 3000 HP. According to my original Bayliner speedometer, I’m now running 347 MPH. Better yet, I’ve found that I’m actually going fast enough to skip over the top of virtually any sea condition short of the perfect storm.
With all of the added horsepower, as you might guess, I too have had to modify the hull somewhat. My first modification was to add 37 steps to the hull to lessen drag. (As you might guess this was a bit difficult since all modifications were done with the boat sitting on a roller trailer in my apartment parking lot.) I also added several additional stringers and bulkheads made of Unobtainium to handle the added stress. Due to the unique properties of this material though, the boat is now actually lighter than air and has to be tied down to the trailer to prevent it from blowing away.
I could go on for hours as to the other modifications I’ve made to this boat, but quite honestly, I need a new challenge. Your boat – although significantly slower than mine – sounds like it’s much more of a chic magnet. That’s become a much higher priority in my life since mom said I have to move out, I’d like to talk to you about a possible trade. Interested?