32 spectre 111mph
 

Ive got an 05 32 spectre that has 500 efi's, I just added -3 imcos that I got from Proroc Raceing and so far we hit 111 today and thats when the stbd engine hatch blew off. We are hoping to get 115 at least. Thanks to Chad1 for all the help wiith this.

That's great:drink:
Stock 500's?

:drink:Any pics of the 32 ?? would love to see em....

Is it orange, yellow and blue>

Yep its Bobs old boat, and yes factory 500's. The boat has run a best of 109 but only once. It was an everyday 105mph boat and today we could hit 111 all day any way,so a true 6 mph We did some timing adjustments and are going to swap the porps to spin inward instead of outward. Got my fingers crossed.

Great looking 32.... Great pics!..

Thanku!!!:drink:

My friend used to own the boat on Lanier and in fresh water we saw a best of 106. Does it still have the black mti trailer under it?(Not MTI the boat manufacturer)

Turning the props in will help.
Jay Pilini
Pilini Marine Technologies
727-421-9495

Jay how are things with you? We met a couple years ago when we came down and bought the boat mentioned from your painter. Very impressive operation to say the least.

Glad you didnt lose the hatch. Jay had to send me a new one. Did you get a Rinda computer to check your tachs? I got my slip numbers to 9%. Good luck

Jay i think he has your first boat.

Things are good! Starting with a clean sheet, new designs and most of the same loyal employees that made it happen before!
I am looking forward to 2011.
I will be in Miami,
contact me @ 727-421-9495
Jay

Is the 32 the same hull as the 30,except for the modification to the deck. If not what are the differences?

The bottom of the 32 is different, more steps, and I am sure their are other changes.

The 32 is the result of about a year of testing. It has a 5 step bottom, more compression in the tunnel, higher freeboard and is 3" wider than the 30.

Yes I love that trailer makes it so easy to tow

Jay Thanks for your time today and I will try those props you recommended. I tell u its nicce to be able to do this and Have support like this, Thanks again to Chad1, Jay, and Rolf @ Proroc Racing. On another note Tom Dyluski in jacksonville put my lowers together after Rolf Machined the new water pickups and he Did a great job. Very maticulious and was fair in price. Check him out at www.SKIperformanceonline.com