|
Stainless Marine
How can you tell the different generations of their exhaust manifolds?
|
Originally Posted by Audiofn
(Post 3320871)
How can you tell the different generations of their exhaust manifolds?
|
Originally Posted by PhantomChaos
(Post 3321006)
The older ones look older than the newer ones. Likewise, the newer ones look newer than the older ones. Hope that helps. :D :drink:
Google is a powerful tool!!!! :eureka: |
Gen II is way smaller and only has a round hole ont the top where the tailpipe riser bolts on.
Gen III is bigger and has an oval hole where a second aluminum riser bolts on that also has 4 ribs in it and then the tail pipes bolt on to that !!!! Gen II is actually kind of like the GIl manifolds..just better. THE GEN III IS THE SH!TS !!!!!! would not want anything else then these ..mine are over 8 years old and never had any problem ! |
The Gen III is port-separated, the old standard is not. Gen III is mostly 5", the standard is 4".
|
Originally Posted by DareDevil
(Post 3321469)
Gen II is way smaller and only has a round hole ont the top where the tailpipe riser bolts on.
Gen III is bigger and has an oval hole where a second aluminum riser bolts on that also has 4 ribs in it and then the tail pipes bolt on to that !!!! Gen II is actually kind of like the GIl manifolds..just better. THE GEN III IS THE SH!TS !!!!!! would not want anything else then these ..mine are over 8 years old and never had any problem ! |
The older gen2 had larger exhaust port openings and less material for gasket sealing
|
Originally Posted by PhantomChaos
(Post 3321581)
I like my description better. :drink:
|
| All times are GMT -5. The time now is 09:25 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.