My 32 SPECTRE @ 112
 

Here I am today with some local friends, Im passing by @ 112 The sweet fountain that was filming me was cruising around 60 or so, BTW its one sick 35 fountain. You guys should come to jacksonville there is some fun hp battles going on amongst the JPBC members and its been Awesome.

Enjoy

http://www.youtube.com/watch?v=fphPW...yer_detailpage


P.S. thanks Jenn

Heres another from a long distance trying to put up a good number all we got so far is 112

http://www.youtube.com/watch?v=fzSiY...yer_detailpage

Nice boat! I bet you can get some better video when it warms up a little.

First video looks good...112 congrats...that 7 mph you picked up was cheap..

what do have for power in the spectre sounds awsome

Factory 500 EFI's

I had Mark @ percision marine turn up the limiters

Chad1 your right. To date I have 2100 in this 7mph

that boat even sounds sweet crusin along @ 50 mph .. m

Sweet Vid. What do you have for outdrive/prop hardware?

XR uppers, Imco-3 shorties, and bravo 4 blade 34pitch props

Awesome! All you need now is a set of Whipples!

Standard transom mount or boxes?

Boxes

Got a friend with a 30 Spectre that runs 112 with 500's also. Good looking boats.

Nice vid..That 32s a great looking boat.... thanku!:drink:

I thought that using the IMCO -3 lower, that it required using an IMCO upper. Got a pic of your setup? Much or any maching necessary?

Nope, Just take a band saw and cut off enough to make the prop clear and then add the imco cavitation plates and thats it

http://i384.photobucket.com/albums/o...g?t=1297622000

curious why you would not put the nuts above the plate?
then you could use slightly longer bolts so you can use the locking feature of the nuts?

great numbers on that set up!!!!

The threads of the bolts are just breaking the nylon of the nuts. The trim ram just above interfered....Good eye!

Great job 32
What a great boat
Do they have access to the bow area for storage?

theres panels under the passenger and drivers feet that come off but it would be a pain. I dont see why you couldnt have a good fiber glass guy install a hatch

nice Vid did this boat used to belong to Bob that has the 36 Nor-Tech now.

Yes Sir it is. He's was on the sticks in the 2nd video

ok i got the pleasure of riding in your boat 2 years ago on Friday going to the lunch when the storm hit. The boat i was in broke a drive in the ocean and Bob picked me up to take me back to Jacksonville. James was on the sticks and we ran back in the rain. Nice boat runs real good and a bunch of great people in Jacksonville.

Sweet!

U said it bro, we still have some enthused boaters in J-ville and two guys in paticular going neck and neck for top speed. Its been alot of fun and I cant wait for the boating season to start up again.

does anyone no what size 5 blade 32 herrings are. 15, 15.25, or 15 5/8

You can get them most diameters. Early ones are usually less diameter than current product.
Steve

Want to try a set of Hering six blades that push my boat on occasion?

Sure ! What size diameter are they.

unless special order ,box stock is 15 .50 ...If you look to try some 5 blades, I think a 32 pitch labbed.

Bill jr. will get with you after the Miami show and poker run.

These only come out for special occasions.

Sr.:boat:

Thanks

:drink: