cost on re-doing the seats?
 

What would it cost to put new covers on the two seats and rear bench and swim platfor on a 27' Baja?

Cost for all the interior?

Not sure on price, but XT should be the man you call to redo a Baja. Here's the link

http://www.xt-innovations.com/

I suggest you fill out your profile for location. Then you'll probably get some recommendations for some shops closer to you to get some prices worked out.

done, thanks

Fixx
 

i see your in chicago il,,the guy that does all my work is in villa park il..Ed's interiors 630-530-4163 ask for ed :drink:

here is some of his work,,scrool down to the bottom of the page,
http://www.powercatboat.com/Group/ES_17h/ES_17h1.html

4yrs ago i got my rear bench seat done,the back rest,and the swim platform and it was 1500.00 and i took the stuff to him.nothing fancy,two tone red and white.i am in virginia.

I got quotes from XT and some local shops and everyone came in at about the same price, $3,500. THis was to recover all cockpit panels and seats. This is with no repair of rotted wood, foam etc. Also I pulled all interior panels and will be putting them back in once the vinyl work is done. Since you are in the Great Lakes area I would assume pricing for you would be similar as I am in Detroit. Oh, mine was for a Velocity 260 so cockpit size is similar.

check out Cantu in Seneca does alot of boats & hot rods out of that shop ...

815-357-8038

I had custom canvas in fox lake do a deck boat for me , lots of pieces and he did a new canvas, was around $2000 but I did it in dec. when everyone was slow.my 2 cents if your going to do it. get the pieces to somebody now when spring hits they will all be busy. it will be harder to get a deal, and cash always helps

I'd be curious on the estimated cost of redoing my rear hatch on my 32 Victory. The vinyl is not ripped or worn, but this boat sat outside quite a while before I bought her and the solid white is yellowed pretty bad. Also, I'd like to add some color like some red and blue streaks to match the gel pattern. Here in Arkansas though, there are not too many choices when it comes to custom marine interiors. I figured I'd have to take her to TX.

Do you have a Shooter, 272, or the Sport 270? Not to say that a local shop will do a nice job also, but we have one advantage over them. We have the original factory (flat) patterns to work with, and contacts with the Baja vendors that produced the molded foam, vinyl, seat frames, ect. The three of us had 20+ years (each) in the design department with Baja. Lane designed the interiors from 1988 to 2008, and his wife Bev supervised the sewing department at Baja.

We are working on a 36 Outlaw from the Chicago area now, (Rooster22 on OSO) and he stated that we are about 6 hours from him. He will be heading this way soon to get his boat.

$3500.00 and we will replace all your rotted plywood, and use the new "Prolite" plastic material. One time offer! Like someone said, when your too busy the pricing go's up.

XT

How did your rear bench seating turn-out?

Is that for the cabin and cockpit?

I am looking at purchasing a Baja 272

$3,500 sounds like a steal of a deal!!

Can you tell us where you can purchase the prolite sheets?

I googled it but nothing came up...

If I was closer to XT Innovator, my stuff would be there in a heartbeat!