Lonseal Floor Project Pics
#1
Member #154
Platinum Member
Thread Starter
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,879
Received 864 Likes
on
317 Posts
Lonseal Floor Project Pics
Some of you wanted to see what the floor looked like when the project was done. Here is the final product...Lonseal Loncoin II floor, Birch White color. I also installed diamond plate in the engine compartment. Whew...glad thats done...Steve
#5
Member #154
Platinum Member
Thread Starter
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,879
Received 864 Likes
on
317 Posts
Sean...Thanks, I'll bring a sample with me when we get together. Its real nice stuff. Looks better live, the pics don't do it justice.
Fred...There are a few things I can give you pointers on before you start, give me a call when the time comes. The 2 part epoxy adhesive is the way to go. Steve
Fred...There are a few things I can give you pointers on before you start, give me a call when the time comes. The 2 part epoxy adhesive is the way to go. Steve
#7
Member #154
Platinum Member
Thread Starter
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,879
Received 864 Likes
on
317 Posts
Playn...I did not have to seam it. It made it by just a few inches. It cuts well, if you have the equipment to make straight cuts, it'll probably seam well. They have a seam sealer that you would need to use also. Maybe there is a floor installer OSO member that could give you some pointers. Steve