Looking for 2" rigging hose for outboards
I am looking for about 8' of black 2" rigging hose. This is the tube that covers all the wires/cables that go to the outboard motor.
I have found some in a kit with a flange: http://www.thmarine.com/product.cfm?PRID=103l But I only need the hose - and I need it by the weekend. Where can I get it? Thanks in advance! |
Not sure where to get it by the weekend, I have heard of people using vacuum cleaner hose for a shop vac, works good, but wont last forever, not left in the sun anyway.
http://www.mcmaster.com/#suction-duct/=bcdgvn |
ebay..
|
|
"borrow" one from the local car wash!!! :eek:
|
Eddie marine
|
Home Depot or Lowes, You can use shop vac hose but it is usually not enough. Go to the submersible/sump pump area and get a replacement hose. Comes in 15 or 20 ft sections and it's cheaper than the shop vac stuff.
|
All times are GMT -5. The time now is 08:33 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.