How can I clean up superchagers???
 

any one have suggestions Im thinking beadblast or wire brush then hand polish or brakekleen any help before I mess them up thanx Tommy

Try wet sanding it then buff with some rouge. Go to eastwood.com

Never Dull

That super charger was never a polished version and that is pretty much the way it will look unless you have it completely polished out.

What type of "clean up" are you looking for? If you want a light polish, here are a few steps. It'd probably take 4hrs or so.
-Sisal wheel (sharp cut wheel) and a 240/300 greasless compound
-Sisal Wheel and a sharp cut compound.
-Spiral sewn wheel (med cut wheel) with tripoli compound (med cut compound)
-Loose wheel (not sewn, finishing cut) with soft cut compound.

There is also a recommended RMP that you spin the wheels at. My personal preference is to spin them a bit faster and use a little less pressure if you are using your buffs in a 6" grinder. You have to make sure not to let the wheel catch on anything though.

Also, a wire wheel will put some scratches in the surface that are a pain to take out in later finishing steps of the polish.

Beware, it is not a fun process!

Here is a pic of an intercooler I just polished using a little more in depth process.

Yeah, take it to Coolerman......:drink:

Ha, polishing shops make me really nervous......

WOW thats what im looking for looks sweet!!!!

+1 there


Whatever you do, don't take a wire wheel to it, you won't be happy.

u need to stop by the shop , i have some polishing waiting for you since your so good at it .:lolhit::drink:

+1 LOL. :coolcowboy:

wher'd he disappear to ??? you mention work and POOF !!!!!!!:drink:

lmao, the work part didn't scare me as much as the polishing part. :lolhit:

there he is just when we were listening to the crickets :eek::lolhit:what up J ???

if you just want to clean it up try some mothers