New V-12 diesel shows up @ Duseldorf Marine Show
07-04-2011, 10:30 AM
#31
Registered
Originally Posted by Catmando
^^^Great post Joe 
do you remember that 39MTI with Yanmar 485s and Arnesons that ran over 100? Not too shabby for an old school inline 6 eh?
Banks must be having problems with that 800hp Duramax because I see nothing about it anywhere, or maybe he's still dialing it in and keeping it secret.
Can't wait to see the price of this V12...
do you remember that 39MTI with Yanmar 485s and Arnesons that ran over 100? Not too shabby for an old school inline 6 eh? Banks must be having problems with that 800hp Duramax because I see nothing about it anywhere, or maybe he's still dialing it in and keeping it secret.
Can't wait to see the price of this V12...
A guy over here has managed to get over 1000ftlbs out of his truck and 860 hp.. runs high 9's on the quarter... but the lower end is all aftermarket...
the fastest non lightened and street driven Duramax Truck in the World
Last edited by MikeyFIN; 07-04-2011 at 10:32 AM.
07-04-2011, 10:51 AM
#32
Registered
1000 ft/lbs and max 860 hp ? ,must be programmed in the ecm to turn low boost at lower rpm,s , cause it would make a whole lot more than that if this engine can make 860 hp .
My 5,9 L cummins makes around 500 hp at 52 psi boost with twins ,and does about 1050 ft/lbs
If it really makes 860 hp ,max torque would be more like 1500ft/ lbs
My 5,9 L cummins makes around 500 hp at 52 psi boost with twins ,and does about 1050 ft/lbs
If it really makes 860 hp ,max torque would be more like 1500ft/ lbs
