Ground Wire Between Both Motors
#3
artselectricinc.com
Platinum Member
A common ground between engines is a must. It should be the same size as your battery cable. I think that it is a CG regulation to do so. It will prevent smoking a small ground wire if you loose the main ground while cranking your engine.
#4
artselectricinc.com
Platinum Member
#5
Diamond Member #001
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
If you have "1-Both-2" battery switches that allow you to power either engine with either battery, you must have a heavy-gauge ground connection between the engines to carry the starter current. That being said, some boats use a grounding/bonding plate where all the battery and engine grounds come together. That will serve the same purpose.
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#6
Registered
Join Date: Dec 2000
Location: Bell Canyon, CA
Posts: 12,754
Likes: 0
Received 0 Likes
on
0 Posts
#8
artselectricinc.com
Platinum Member
Apparently it is a coast guard reg. Also it is common sense. As I stated in the above post you can melt a wire and potentially start a fire if a main ground is lost during cranking. I own an auto repair shop and have replaced more than one clutch cable because of the above scenario.