Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Quad 1350 Nor-Tech Cat in Rigging (https://www.offshoreonly.com/forums/general-boating-discussion/254772-quad-1350-nor-tech-cat-rigging.html)

Matt Trulio 05-31-2011 03:07 PM

Quad 1350 Nor-Tech Cat in Rigging
 
This should be a monster, http://speedonthewater.com/new-boats...n-rigging.html.

WARPARTY36 05-31-2011 03:12 PM

That's going to be expen$$$ive:drink:

Gladhe8er 05-31-2011 03:17 PM

Wow. Just plain nuts!

BDiggity 05-31-2011 03:18 PM


Originally Posted by WARPARTY36 (Post 3416533)
That's going to be expen$$$ive:drink:

Nothing a couple bucks extra per barrel of oil cant cover. :drink:

Chuck 05-31-2011 03:20 PM

"A Monster" is an understatement!!!!

Riley0114 05-31-2011 04:48 PM

whos gonna be the one to attach a rope to it and tube behind it?

Perlmudder 05-31-2011 04:58 PM

800k in engine and drive. that is gonna be a monster for sure

Catastrophe 05-31-2011 05:02 PM

At least its going to the right part of the world for cheap fuel.

PokerRun388 05-31-2011 09:00 PM

I can only imagine what this 52 will cost w/ 4 1350s... I was told the M31 DCB w/ 1350s was in the 700K+ range, so a 52 footer w/ 4 1350s?.... Oh Lord, LOL....

Shallow Minded 05-31-2011 09:01 PM

In. Sane.

Carguy08 05-31-2011 09:17 PM

Any guess on speed????

jayboat 05-31-2011 09:18 PM

Holy crap! I'm goin' up there tomorrow and grab some pix. :evilb:

Cavanti53 05-31-2011 09:25 PM


Originally Posted by Carguy08 (Post 3416915)
Any guess on speed????

The first 52 with 2 x 1350hp runs 150mph per Terry so add 2 more but also add quite a bit of weight.

I never did hear what GoldRush runs with 4 x 1100hp top speed. I think he has setup to be a good all around boat. If you can call a 50 with 4 engines "good all around"....

Terry, progress pictures please....?

xconn92 05-31-2011 09:26 PM

I never did hear what GoldRush runs with 4 x 1100hp top speed. I think he has setup to be a good all around boat. If you can call a 50 with 4 engines "good all around"....




168mph

huskyrider 05-31-2011 09:45 PM


Originally Posted by catastrophe (Post 3416631)
At least its going to the right part of the world for cheap fuel.


Originally Posted by BDiggity (Post 3416540)
Nothing a couple bucks extra per barrel of oil cant cover. :drink:

If I owned the refinery I'd jump on her immediately too, LOL!!!
That barrel price has been sliding lately and IMO now would be the time to Go for it Cowboy, Let's Rodeo. :coolcowboy:

See ya,
Kelly

LubeJobs42 05-31-2011 10:33 PM

I heard there may be another cat on the drawing board with quad 1,350s. ;)

jayboat 05-31-2011 10:59 PM


Originally Posted by LubeJobs42 (Post 3417022)
I heard there may be another cat on the drawing board with quad 1,350s. ;)

I like the sound of that! :drink:

1bagger 06-01-2011 12:27 AM

Quads ?
Who has the nuts to put 5 1350s in a boat ?
Double dog dare you .

Jolley 06-01-2011 08:55 AM

Gino ?????????????????????????????????? Now what? :eek:

LESSONLEARNED 06-01-2011 12:23 PM


Originally Posted by LubeJobs42 (Post 3417022)
I heard there may be another cat on the drawing board with quad 1,350s. ;)

48 MTI with Quads maybe...??? Lambo Theme... :evilb:

Catmando 06-01-2011 01:15 PM


Originally Posted by LubeJobs42 (Post 3417022)
I heard there may be another cat on the drawing board with quad 1,350s. ;)

Is it in the mold yet?

Cavanti53 06-01-2011 04:31 PM


Originally Posted by xconn92 (Post 3416938)
I never did hear what GoldRush runs with 4 x 1100hp top speed. I think he has setup to be a good all around boat. If you can call a 50 with 4 engines "good all around"....




168mph

Thank you Sir!

Very Impressive....I love the layout of your boat. Especially the interior.

Cavanti53 06-01-2011 10:45 PM


Originally Posted by LubeJobs42 (Post 3417022)
I heard there may be another cat on the drawing board with quad 1,350s. ;)

You will have to change your GPS picture Gino, from 193 to 200MPH plus maybe....Pretty Cool.

What is the ETA on the start of the new new Mercedes replacement?

Lot's of Lube Jobs being done but the Lube Master.

Good Luck too you sir.

Kurt Hamilton 06-02-2011 02:53 AM

Not sure what speed a 50+ with quads does for speed but over here in oz the first ski ace boat to run one hit the water a week or so ago in a 21'Force. Top speed (with plenty to burn i believe) so far is 129mph. The only set back was spinning it and throwing the passanger out at over 100mph!!
Bent steering column and damaged some levers is all.... lucky but!

SHARKEY-IMAGES 07-10-2011 09:55 PM

http://sharkeyimages.zenfolio.com/im...45145307-4.jpg

http://sharkeyimages.zenfolio.com/im...19299343-4.jpg

http://sharkeyimages.zenfolio.com/im...41768009-4.jpg

http://sharkeyimages.zenfolio.com/im...78945986-4.jpg

http://sharkeyimages.zenfolio.com/im...33044901-4.jpg

http://sharkeyimages.zenfolio.com/im...04330518-5.jpg

SHARKEY-IMAGES 07-10-2011 09:58 PM

http://sharkeyimages.zenfolio.com/im...36933324-5.jpg

http://sharkeyimages.zenfolio.com/im...37211143-5.jpg

http://sharkeyimages.zenfolio.com/im...93978866-4.jpg

http://sharkeyimages.zenfolio.com/im...73308599-4.jpg

http://sharkeyimages.zenfolio.com/im...64663763-4.jpg

http://sharkeyimages.zenfolio.com/im...67391128-4.jpg

http://sharkeyimages.zenfolio.com/im...98041745-5.jpg

SS930 07-11-2011 08:56 AM

That's going to be one amazing boat! :cool:

budd 07-11-2011 09:11 AM

Beautiful. any shots of the orange 39 cc next to it?

waterboy222 07-11-2011 09:47 AM

That ought to get some water in the air!

ActiveFun 07-11-2011 11:06 AM


Originally Posted by catastrophe (Post 3416631)
At least its going to the right part of the world for cheap fuel.

The owner probably doesnt have to pay for fuel. He probably owns fuel we are getting ripped of by. Gas at the gas dock used to be $.50/gal more than on land. Gas dropped to $3.75 on land, but the gas dock never goes down. $4.79 and up.

Keytime 07-11-2011 11:50 AM

"You're probably wondering... did he fire up 3 engines or or did he fire up 4? You know... in all this confusion... I kinda lost track myself..."

salesmanship 07-11-2011 12:08 PM


Originally Posted by budd (Post 3449253)
Beautiful. any shots of the orange 39 cc next to it?

Hey Budd,

That's my new demo. I'll have pics posted tomorrow on the Nor-Tech forum.

TS

SHARKEY-IMAGES 07-11-2011 03:56 PM

Many more photos can be found on the Nor-Tech Factory Tour: CLICK HERE TO VIEW !


Originally Posted by budd (Post 3449253)
Beautiful. any shots of the orange 39 cc next to it?

http://sharkeyimages.zenfolio.com/im...31424220-4.jpg

http://sharkeyimages.zenfolio.com/im...83941856-4.jpg

http://sharkeyimages.zenfolio.com/im...21151268-4.jpg

dkwestern 07-11-2011 04:17 PM

Terry, Curious why console door switched from stbd to port on the CC? Rigging interference of some sort? New mold? Just seems like it would work the same on either side.

A.O. Razor 07-11-2011 05:44 PM


Originally Posted by Riley0114 (Post 3416622)
whos gonna be the one to attach a rope to it and tube behind it?

That's easy. Pokerrun388 of course. He's already got a tubing date with the Skater 388slw at next years Desert Storm:lolhit::lolhit:

thisistank 07-11-2011 06:03 PM

Can't wait to see that quad monster hit the water!

That orange on the 39 CC is stunning!

huskyrider 07-11-2011 06:03 PM


Originally Posted by Keytime (Post 3449434)
"You're probably wondering... did he fire up 3 engines or or did he fire up 4? You know... in all this confusion... I kinda lost track myself..."

LMAO !!!

"So do you feel lucky boy???"
"Mista, I just got's to know"

See ya,
Kelly

MrSneakAttack 07-11-2011 06:06 PM

I'd O.d. On The Way To The Launch With That Beast Lol

PokerRun388 07-11-2011 09:23 PM

52 Quad 1350s WOW
 
I can't wait to see this 52 completed....



..........................:drink:................. ..........

salesmanship 07-12-2011 07:38 AM


Originally Posted by dkwestern (Post 3449707)
Terry, Curious why console door switched from stbd to port on the CC? Rigging interference of some sort? New mold? Just seems like it would work the same on either side.

New mold


All times are GMT -5. The time now is 11:35 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.