Bronson Hill Lab Finish Report
It looks great but I gained a whopping 0 mph and 40 rpms, I will keep you posted on there response, they promised me 2-4 mph and 300 rpm ( rpm being my main concern)
|
liquid asset, that is to bad. I have two friends that used Bronson Hill. One with a 312 Formula/454mags & Whipples, he gained a couple of mph. My other buddy has a 91 32 Fountain with a couple of 600hp Tyler Crockett motors. He was running 85 mph with 27 4 blade Hydro's. Sent the props to Bronson and is now running 87+ on gps. Needless to say he is very happy and the boat just feels smoother after the labbing.
Jan |
Well I hated reading that!!! But in reading up and asking around who to use, they were who I would have chose also. What was thier turnaround time to lab them?
|
rob...try john york....you WILL NOT be dissapointed.
|
Be sure its apples and apples
Be careful to compare results in a fair manner. What was comparative air temp, water temp (if intercooled), sea level, humidity, barometric pressure etc. weight in boat, location of weight (600 lbs of passengers is often located differently than 600 lbs of fuel). It's not uncommon for many performance boats to differ day to day this amount without touching set-up. it's just important to keep all this in mind when looking at results of a few digits. Happy tuning!
|
I had my Mirage 23P lab finished by Bronson/Hill and it came out great. I picked up 300 rpm and about 3 MPH.
Just my .02 Ted |
I had Bronson-Hill lab 2 Hydromotives last year. Gained a couple of MPH and made the boat feel a lot smoother.
|
turn around was 5 days plus shipping
|
:)
|
All times are GMT -5. The time now is 11:15 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.