|
I did 2 and just tied the two lanyards together.
There is nothing that both motors use together that way there will never be both motors down because of one part. |
Originally Posted by boatnt
(Post 3442288)
does anybody make a kill switch that controls both engine?
|
No it does nt 83 formula i re did the whole boat and there was nt one there from the factory. I just ordered the one from cp thanks guys
|
How is a switch wired in on new installation? Off ignition switches?
|
Originally Posted by BL6
(Post 3802755)
How is a switch wired in on new installation? Off ignition switches?
|
Originally Posted by US1 Fountain
(Post 3802438)
Your boat doesnt have one?????
this is a old thread I started a couple of boats ago |
Originally Posted by compedgemarine
(Post 3802185)
other options for billet,,http://www.danamarineproducts.com/KillSwitches.htm |
Originally Posted by compedgemarine
(Post 3802185)
other options for billet,,http://www.danamarineproducts.com/KillSwitches.htm |
Originally Posted by boatnt
(Post 3803052)
it does..
this is a old thread I started a couple of boats ago |
Bringing this old thread back up again.
My twin outboard Skater has 2 Mercury Racing kill switches: https://www.cpperformance.com/c-175-kill-switches.aspx The starboard kill switch kills both engines. The port kill switch kills the port engine only. That does not seem right. How are these supposed to be wired? __PRESENT |
| All times are GMT -5. The time now is 03:46 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.