smart craft race view ??
 

Mainly how do you interface it to 600 sci's that have the analog converters, is it unplug the analog converters, and plug in the race view? 2nd, how much $$ does one cost for twin 600sci's?
Thanks,
Dean

TTT, so no one has any input here?

Are you talking about RACEPACK?

well,
Not sure, this is what I found on BAM Marine website.

http://www.mercruiserparts.com/Show_...C+Race+Edition

I think this is the race pack, not sure?

That's vessel view I believe

MH42,
Thanks for your input, I' waiting for Mark @ BAM Marine to call me back, and I'll hopefully be able to ask him the correct Q's. I wan the system that shows all the parameters.
Thanks,
Dean

it's around 1500 for the system per side I believe, I was going to say talk to BAM...that would be the system..

Vessel View Race Edition
 

Hi Dean,

It's Vessel View Race Edition that you seek. That is what came with my 600sci. See attached. Hope this helps.

http://www.mercuryracing.com/accessories/vesselview.php

Fearless,
Thanks, I just got off the phone with Mark @ Bam and he said that is what I want, what you have, it's not Cheap though!:eek:
Dean

Sending you a pm.

Dean

Vessel view and the race adition, not much difference.
I bought the standard vessel view. Great stuff.
You need the screen system, computer and the harness. The harness plugs into your underdash smart craft plug. Bth the gauges and the vessel view will work. YOu need one set, with a harness for twin set up.
The vessel view will recognize the engine and the number of engines. It's pretty much a plug N play set up.
Call Innovation ask for Bob, they have a used set, less harness. OR.. a great deal, here>>>>
http://cgi.ebay.com/ebaymotors/MERCU...ssoriesQ5fGear

BTW.. how are the props working out?
P

P,
Thanks for the info, unfortunately I've only had the boat out 1 time, and haven't had a chance to try the 32's!:eek: Hopefully this weekend, and I'll update you.
Thanks,
Dean

I have a new race edition. Never used it. $500. You would just have to buy the harness. I was going to update my vessel view but never did.

Brace,
I'm sending you a PM now!:drink:
Thanks,
Dean

It's ok. No hurry. Just courious.
($500 is a good deal on that vessel view. Dean)

If Dean does not take it I will.
Thanks
Steve

Steve,
Sorry dude, I'm buying it, I talked with BY last night about it.
I'll keep my eye for another 1.
Dean

Dean bought it.

Can the race view be used the same at the vessel view?

I have twin 300XS's and my vessel view screen is 4 years old and the edges of it don't display very well any more. I want to buy a new screen but not sure if they are inter-changeable or not, or what the difference between the two are?

Dean,

Just what will this do that your gauges will not do?

Dail

BB,
I'll give a call on the way home shortly, I'm going to launch the Hustler for the weekend this afternoon, you want to go or are you busy this afternoon:drink:
Dean