- - Help please!
(https://www.offshoreonly.com/forums/general-boating-discussion/258731-help-please.html)
BY U BOY
08-02-2011 09:23 PM
Originally Posted by n20michael
(Post 3460637)
Take a coat hanger or piece of wire, use a small brush or Q tip and put a dab of crazy glue or JB weld on it and see if you can pull it out that way, or, yank the dash and replace the input from the back
Michael
This is what worked but the crazy glue didn't. Used the gorilla glue version and I can tell you this chit is the chit. makes crazy glue look like like elmers school glue. :eek: I cut the end of a q tip off and put the glue on it and let it dry for 20 mins and bam pulled out.
US1 Fountain
08-02-2011 09:24 PM
do you still have both channels?
BY U BOY
08-02-2011 09:26 PM
Originally Posted by US1 Fountain
(Post 3468452)
do you still have both channels?
Sure do. Thought maybe it was the new cable but tried another and was the same.
JasonSmith
08-03-2011 12:07 AM
F*ck it. Buy a new truck.
BY U BOY
08-03-2011 10:34 PM
Originally Posted by JasonSmith
(Post 3468563)
F*ck it. Buy a new truck.
Lol. Looking for an old CJ to replace the boat. :eek:
