M12 x 1.5 LH NUT NEEDED!
#1
Registered
Thread Starter
M12 x 1.5 LH NUT NEEDED!
Does any one know where I can find one!?!!
I've tried Fastenal, McMaster, etc.
It's an oddball for sure.
Thanks in advance guys.
740:504:8855
I've tried Fastenal, McMaster, etc.
It's an oddball for sure.
Thanks in advance guys.
740:504:8855
Last edited by RT930turbo; 08-03-2011 at 07:58 PM.
#4
Registered
Thread Starter
Same thread, but never seen one in a left thread... It's actually for a Ferrari Shift linkage. Crazy Italians
You don't happen to have it sitting in your toolbox do you? I'll make it worth your time to mail it to me!
I'm striking out everywhere!
You don't happen to have it sitting in your toolbox do you? I'll make it worth your time to mail it to me!
I'm striking out everywhere!
#5
Do a search, I found alot of them.
Can always cut a lug nut down, or buy the tap from McMasterCarr and make one from a smaller nut. Course that tap is a little pricey. Run a standard die over the stud. Not sure how much jury riggin you wanna do for that car.
http://mdmetric.com/rodend/jnutmet1.htm
Can always cut a lug nut down, or buy the tap from McMasterCarr and make one from a smaller nut. Course that tap is a little pricey. Run a standard die over the stud. Not sure how much jury riggin you wanna do for that car.
http://mdmetric.com/rodend/jnutmet1.htm
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 08-03-2011 at 09:57 PM.
#6
http://cgi.ebay.com/Kubota-Tie-Rod-E...-/300526766352
Well chit, just go to your Kubota dealer and buy a tie rod lock nut.
Well chit, just go to your Kubota dealer and buy a tie rod lock nut.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#7
Registered
Thread Starter
http://cgi.ebay.com/Kubota-Tie-Rod-E...-/300526766352
Well chit, just go to your Kubota dealer and buy a tie rod lock nut.
Well chit, just go to your Kubota dealer and buy a tie rod lock nut.
I'll give Maryland metrics a call tomorrow.
#8
Registered
Thread Starter