|
Chev Big Block Measurement
1 Attachment(s)
Can some one give me this measurement in inches from the motor mount top front hole to the center of the exhaust hole
|
It varies.
Tall Deck, short deck, Raised exhaust port heads. Lots of variables Mark |
Stock 502 Not sure on the heads other than they are aluminum. I'm trying to find out where my headers will be comeing out the back. The motor mounts are still in the boat and I know from the center of the headers to the center of the top is 13". My motors are still not back from the motor man
|
1 Attachment(s)
I just can't go down any lower but can go up
|
Originally Posted by Face It
(Post 3463631)
I just can't go down any lower but can go up
|
I just don't want to cut into the bumper rail
|
3 Attachment(s)
This is where we are at now
|
what deck? 10.2 or 9.8 ill be at the shop at 7 am tomorrow i have tall decks if it helps any
-Mike |
Mike , Thanks 9.8 - Steve
|
Who has your motors can't they give you the info you need?
|
| All times are GMT -5. The time now is 07:29 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.