Need a Mercruiser 350/260hp
#2
Registered
try 1-800 runs new ,com they are out of holliston ,ma. My Dad and have I have both used this place.
good luck
good luck
#3
Registered
Join Date: Sep 2011
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hi Stiletto89
i have a pair of 350 that i am thinking of selling as i am after buying a pair of 525 efi to replace them
they was only put in to the boat at Christmas and have only done about 24 or 28 hours ? from new
they are running sweat and have not yet even been fully run in
every part has nearly been 100% fully replaced with new
every nut bolt and washer i have had replaced with stainless steel ones they have chrome rocker covers with stainless steel oil caps
i have even replaced the old cast iron manifolds with new GLM aluminum exhaust manifolds which are 56 kg lighter
these engines look are are the nuts you will not find better
myself and my engineer has spend 5 months putting the engines together and getting them up and running nice
they sound and look great
they have been fully resprayed
you will not find one bit of dirt or rust on them anywhere they are mint
they even have stainless steel risers and exhaust system
which i had fully made which cost me about £1400
i am not sure if the exhaust system will be going with the engines as yet
because i do not really know what i am doing of just yet
and also it depends if the person wanting the engines wants them as they may have there normal set up ??
anyway if you are interested let me know and i will email you some photos over
my email is [email protected]
lee
i have a pair of 350 that i am thinking of selling as i am after buying a pair of 525 efi to replace them
they was only put in to the boat at Christmas and have only done about 24 or 28 hours ? from new
they are running sweat and have not yet even been fully run in
every part has nearly been 100% fully replaced with new
every nut bolt and washer i have had replaced with stainless steel ones they have chrome rocker covers with stainless steel oil caps
i have even replaced the old cast iron manifolds with new GLM aluminum exhaust manifolds which are 56 kg lighter
these engines look are are the nuts you will not find better
myself and my engineer has spend 5 months putting the engines together and getting them up and running nice
they sound and look great
they have been fully resprayed
you will not find one bit of dirt or rust on them anywhere they are mint
they even have stainless steel risers and exhaust system
which i had fully made which cost me about £1400
i am not sure if the exhaust system will be going with the engines as yet
because i do not really know what i am doing of just yet
and also it depends if the person wanting the engines wants them as they may have there normal set up ??
anyway if you are interested let me know and i will email you some photos over
my email is [email protected]
lee