Custom plexi-glass wind deflector ?
Where can I have a plexi-glass wind deflector made for my boat, I see them on OuterLimits, Cigarette's, Baja's and others, thanks.
Kirk |
I looked at their website last night, but I can't recall the name. They are producing CUSTOM plexi windshields, deflectors and splash shields to your specifications. This included sizes, colors, and bends. I know that I got the website from the back pages of Hot Boat. I'll look again tonight, but if I forget to give you the address, PM me and I'll forward it.
|
Thanks Cord I'll try to find it if, if I can't I'll send you a PM tonight.
Kirk |
The ads are for a adjustable wind deflector that attaches to a grab rail. They are selling them as a kit.
|
www.windaway.com is the site for the clamp-on ones. I use these on my Formula 382, and remove them when I don't need them. Nice hardware, but not cheap. - $60 each. Well, OK - for a "boating gadget" that's cheap.
|
KN;i have the windaway deflectors on my checkmate and they work real well, i don't have to have a strap on my sunglasses anymore. they are tested not to break up to 80 mph.. good luck, and safe boating; bill :cool: :cool:
|
1 Attachment(s)
Cord, what website did you see custom plexi windshields on? I checked out windaway.com they won't work on my boat. I'm looking for a one piece unit that goes across the whole race fairing like these.
|
1 Attachment(s)
one more
|
This company custom made windshields. I'll have to get the address tonight as it's on my home computer...
|
|
THAT'S THE ONE! Finney's!
|
I made a template out of cardboard and then had it made locally by a plastics shop. Cost $75..
|
Cignificant how well did it fit, and how hard was it to make the template? My race fairing has a curved radius to it, I think it would be hard to make a template out of cardboard, I need to find something that will hold its shape better, maybe lead flashing? Anyone else have any ideas, thanks for the replys.
Kirk |
1 Attachment(s)
My fairing is bascially straight with two bends so it was easy to make out of cardboard. It fits great. Here's the only picture I have of it..
|
Made this one myself
1 Attachment(s)
I had the flaps and didn't like the looks on my 1999 HTM SR-24
|
full view pic
1 Attachment(s)
of windshield
|
If everything works out ....
I will probably do another one in smoke or black plexiglass
|
just made one for my sonic cost me $22 7" high and 72 " long it cuts real easy and you can bend it with a little heat...
|
All times are GMT -5. The time now is 05:53 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.