Offshoreonly.com - need y pipe for TRS (elbows)

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - need y pipe for TRS (elbows) (https://www.offshoreonly.com/forums/general-boating-discussion/263932-need-y-pipe-trs-elbows.html)

jeff32

10-12-2011 09:37 AM

need y pipe for TRS (elbows)

either new, or used. They are not actually Y-pipes, they are seperated elbow assembly

stbd side part number is 77117a3

port side part number is 77118a3

I found a SET A DOLLER OFFSHORE BUT STILL MISSING A SET FOR 2ND ENGINE...

Thanks for your help!

14 apache

10-12-2011 01:40 PM

Quote:

Originally Posted by jeff32 (Post 3525463)

Do they bolt to the inner transom plate with three bolts. If so i have 2 sets 150.00 plus shipping. Thanks Eric

jeff32

10-12-2011 04:17 PM

Let me check!

14 apache

10-12-2011 05:55 PM

Quote:

Originally Posted by jeff32 (Post 3525749)

Let me check!

Just checked the part # i have them.

jeff32

10-12-2011 11:26 PM

1 Attachment(s)

here is the scan of what I apparently need, do you have the bottom and top pipes?

14 apache

10-13-2011 07:08 PM

Quote:

Originally Posted by jeff32 (Post 3526121)

here is the scan of what I apparently need, do you have the bottom and top pipes?

Jeff the only thing i have is the elbows for the transom plate. The inlet is 4".

jeff32

10-13-2011 08:08 PM

I'll go measure in 2 or 3 days... thanks!

Pwrbt33

10-14-2011 07:08 AM

All we have are 2 #7's. 1 left and 1 right. Sorry.

jeff32

10-23-2011 07:11 PM

the hole itself really is a 3 inches hole on the transom. the pipe's outside edge might be a 4 inches... did you measure the outside of pipe? or hole on transom?

Clustergear

10-23-2011 07:38 PM

Quote:

Originally Posted by jeff32 (Post 3526121)

here is the scan of what I apparently need, do you have the bottom and top pipes?

I have one new set of #7. I have a used set of #4 but the down angle was cut off to use the pipes for thru transom exhaust. If interested send me a PM and I'll sent you pictures of what I have.

All times are GMT -5. The time now is 02:02 PM.