need y pipe for TRS (elbows)
10-12-2011, 09:37 AM
#1
Platinum Member
Platinum MemberThread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,717
Received 366 Likes
on
245 Posts
need y pipe for TRS (elbows)
either new, or used. They are not actually Y-pipes, they are seperated elbow assembly
stbd side part number is 77117a3
port side part number is 77118a3
I found a SET A DOLLER OFFSHORE BUT STILL MISSING A SET FOR 2ND ENGINE...
Thanks for your help!
stbd side part number is 77117a3
port side part number is 77118a3
I found a SET A DOLLER OFFSHORE BUT STILL MISSING A SET FOR 2ND ENGINE...
Thanks for your help!
10-12-2011, 11:26 PM
#5
Platinum Member
Platinum MemberThread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,717
Received 366 Likes
on
245 Posts
here is the scan of what I apparently need, do you have the bottom and top pipes?
Last edited by jeff32; 10-12-2011 at 11:29 PM.
Gold Member
10-23-2011, 07:11 PM
#9
Platinum Member
Platinum MemberThread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,717
Received 366 Likes
on
245 Posts
the hole itself really is a 3 inches hole on the transom. the pipe's outside edge might be a 4 inches... did you measure the outside of pipe? or hole on transom?
10-23-2011, 07:38 PM
#10
Registered
Join Date: Mar 2006
Location: Lake George NY
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
I have one new set of #7. I have a used set of #4 but the down angle was cut off to use the pipes for thru transom exhaust. If interested send me a PM and I'll sent you pictures of what I have.
