PSIRacing 6 Cylinder Eliminator...Finally 129MPH
#12
VIP Member
VIP Member
Join Date: Mar 2010
Location: CT, FL
Posts: 1,988
Likes: 0
Received 0 Likes
on
0 Posts
Very nice, you can convert the block to dry sump by the way if you start pushing more revs. I did it with mine, worked great. If you have any questions feel free to send me over a pm...I know pretty much every trick on that motor, and the rb26
#13
Registered
Thread Starter
Join Date: Jun 2009
Location: Miami,FL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
a 2j! That is one hell of a motor. Did you do anything internally to it?
I had 3 Street/Drag Supras all making over 1200rwhp about 5 years ago....
One with 1400rwhp+ with a 2spd glide...car ran 8.19@181mph...
You cannot kill that motor with 1000hp...I'm glad seeing it running in a marine application!
Stock rods/Pistons will hold about 800torque before they die...
Rods and Pistons in the block, she'll hold 1200 no problem...stroke it out, and you make even bigger power, but it's one of the finest power plants to come out, the heads don't flow over 315cfm..that was the only drawback, you can CNC them to get about 340 but it's a big lift and have to run a very aggressive duration to flow. For the kind of power I think you're pushing, that looks like a small shaft 63? It must be fantastic...
I had 3 Street/Drag Supras all making over 1200rwhp about 5 years ago....
One with 1400rwhp+ with a 2spd glide...car ran 8.19@181mph...
You cannot kill that motor with 1000hp...I'm glad seeing it running in a marine application!
Stock rods/Pistons will hold about 800torque before they die...
Rods and Pistons in the block, she'll hold 1200 no problem...stroke it out, and you make even bigger power, but it's one of the finest power plants to come out, the heads don't flow over 315cfm..that was the only drawback, you can CNC them to get about 340 but it's a big lift and have to run a very aggressive duration to flow. For the kind of power I think you're pushing, that looks like a small shaft 63? It must be fantastic...
#14
VIP Member
VIP Member
Join Date: Mar 2010
Location: CT, FL
Posts: 1,988
Likes: 0
Received 0 Likes
on
0 Posts
If you still had the ignition stock setup...you could do some timing tricks to get more HP...since you're raw water cooled , cooling won't be an issue (I'm presuming you are).....264 duration would run just fine.
You'll be fine, she looks great!
Did you AEM, Big Stuff, DFI, Motec it?
You'll be fine, she looks great!
Did you AEM, Big Stuff, DFI, Motec it?
#20
Registered
Thread Starter
Join Date: Jun 2009
Location: Miami,FL
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
@scarab63...definitely gonna get some video next time out...wanna position the go pro in a good spot where it can still catch whats goin on in the cockpit but not get to much wind noise...ill figure it out..
@pokerrun388...been thinking alot about that 144MPH run that Teague did and hey you never know....not sure if I really wanna drive it that fast....im sure if i put a bigger prop and really let it sit there who knows what would happen...the thing of what im trying to accomplish is great acceleration...I mean now it must of went from 60-129mph in a matter of about 20 seconds....its crazy...lets see what happens...im beyond excited and gratefull!!!
@JasonSmith...Thanks...im gonna stay with it
@pstorti....Thank you...Diesals are great and can handle gobs amount of boost...unfortunately I dont really deal with them...Sorry!
Thanks again guys...stay tuned for a vid!! Gotta give mee a couple weeks, got 1 change Im gonna make!!
@pokerrun388...been thinking alot about that 144MPH run that Teague did and hey you never know....not sure if I really wanna drive it that fast....im sure if i put a bigger prop and really let it sit there who knows what would happen...the thing of what im trying to accomplish is great acceleration...I mean now it must of went from 60-129mph in a matter of about 20 seconds....its crazy...lets see what happens...im beyond excited and gratefull!!!
@JasonSmith...Thanks...im gonna stay with it
@pstorti....Thank you...Diesals are great and can handle gobs amount of boost...unfortunately I dont really deal with them...Sorry!
Thanks again guys...stay tuned for a vid!! Gotta give mee a couple weeks, got 1 change Im gonna make!!