2003 hustler Talon 377 KE Limited Edition
#1
Registered
Thread Starter
Join Date: Nov 2010
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
2003 hustler Talon 377 KE Limited Edition
I saw this boat and found out it is about an hour from where I live. I talked to the guy and he agreed to let me come and check it out - even though I cannot afford it. Isn't this boat worth a lot more, like about $180K? He told me it has no rub rail because it was made from one mold, not two halfs put together. It has two 900 HP SC EFI motors too. Wicked boat. He said the tattle tale GPS shows the higest speed of 161 MPH.... With huge 36 pitch 5 blade cleaver props... He said it is a little hard to get off the line, but once it hits plane speed it shoots up and takes off. Looking forward to seeing such a high performance boat.
http://www.powerboatlistings.com/view/14218
http://www.powerboatlistings.com/view/14218
#4
They were made in a traditional method same as most others, not in one piece. Great boat btw
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#5
Registered
I saw this boat and found out it is about an hour from where I live. I talked to the guy and he agreed to let me come and check it out - even though I cannot afford it. Isn't this boat worth a lot more, like about $180K? He told me it has no rub rail because it was made from one mold, not two halfs put together. It has two 900 HP SC EFI motors too. Wicked boat. He said the tattle tale GPS shows the higest speed of 161 MPH.... With huge 36 pitch 5 blade cleaver props... He said it is a little hard to get off the line, but once it hits plane speed it shoots up and takes off. Looking forward to seeing such a high performance boat.
http://www.powerboatlistings.com/view/14218
http://www.powerboatlistings.com/view/14218
I think its been for sale for awhile now , in the SF Bay Area. Pretty sure that I saw it for sale over a year ago
Thank you
Jim
#9
Registered
I doubt it will see 161mph with 900hp considering it took twin 1300's to push the same boat into the low 160's. They are a big boat and not a true tunnel.
Last edited by Philm; 10-28-2011 at 12:12 PM.
#10
Registered
Like another said, it is not one mold. It is called a "capped" boat. Instead of the rub rail, they bond the hull and deck together with more fiberglass, sand, smooth and paint.