Offshoreonly.com - Winter upgrades/projects, let's her them!

Page 4 of 6

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Winter upgrades/projects, let's her them! (https://www.offshoreonly.com/forums/general-boating-discussion/267392-winter-upgrades-projects-lets-her-them.html)

4195	12-21-2011 10:16 AM

3 Attachment(s)

Repaint dash panels and bolster bases. Dropped my 675 Keith Eickerts off at Richie Zuls for a frshen and bump up. New header and tail pipes and a few odds and ends....

Biggus

12-21-2011 10:21 AM

Quote:

Originally Posted by 4195 (Post 3576130)

Repaint dash panels and bolster bases. Dropped my 675 Keith Eickerts off at Richie Zuls for a frshen and bump up. New header and tail pipes and a few odds and ends....

That's how to get it done! Nice:drink:

Kurt

shootitup

12-21-2011 10:25 AM

Winter projects

- new fuel tanks both side
- new outside doors to cabin
- door to the toilet room
- cabin seats both pontoon side
- dash pantings

tjred

12-21-2011 10:38 AM

winter project

Half cabin interior, new graphics and get a new Hering prop.

ROTAX454

12-21-2011 11:08 AM

Quote:

Originally Posted by shootitup (Post 3576134)

Winter projects

- new fuel tanks both side
- new outside doors to cabin
- door to the toilet room
- cabin seats both pontoon side
- dash pantings

I would (along with a host of some AO and Awesome owners) interested in your cabin door project. Go over to either the AO or Awesome thread and let us know what you find or build.

ROTAX454

12-21-2011 11:23 AM

2 Attachment(s)

Quote:

Originally Posted by shootitup (Post 3576134)

Winter projects

- new fuel tanks both side
- new outside doors to cabin
- door to the toilet room
- cabin seats both pontoon side
- dash pantings

Mitch Tolan did my panels.

shootitup

12-21-2011 01:13 PM

Quote:

Originally Posted by ROTAX454 (Post 3576159)

Mitch Tolan did my panels.

Cool panels sure.
And ok, i can put the thread of that small cabin project to AO.

502ss

12-21-2011 05:30 PM

Quote:

Originally Posted by Biggus (Post 3575028)

Hope to replace my stock Weiand 575SCI blowers with polished, billett 'The Blower Shop' blowers.

Also, working on a cosmetic resto on my '84 16' Formula One.

-There's sure is some cool projects going on here!:drink:

Kurt

What do you have like three hours on that new boat and your already upgrading the superchargers! :drink:

pullmytrigger

12-21-2011 08:06 PM

Quote:

Originally Posted by 4mulafastech (Post 3575721)

I like it! How much weight do you think you will drop?

I switched from stock cast iron manifolds to Revolution Marine alum manifolds in my twin sbc set up and and saved 240lbs in total.....each complete stock iron manifold and riser weighed 85lbs !, each complete Rev Marine mani/riser weighed 25 lbs.

back of the boat went up about an inch

ridefast77

12-22-2011 10:25 PM

Quote:

Originally Posted by Marginmn (Post 3574961)

Convert the first 38 Donzi ZRC ever made (hull #001) from a side-by-side bravo set up to a staggered Arneson Asd-7 set up powered by Ilmor 710's. Also do some cosmetic changes as well. Follow updates in the Donzi section.

http://www.offshoreonly.com/forums/d...posit-zrc.html

i was at my buddys shop and saw your boat coming a long good its going to be a bad ass set up. i snapped a couple pic if you would like me to post them?

All times are GMT -5. The time now is 02:51 AM.

Page 4 of 6

« First

Show 40 post(s) from this thread on one page