Upside down headers.
#1
Registered
Thread Starter
Upside down headers.
Got a set of these headers with a motor I bought (for a boat I知 doing) and have no clue what to do with them and no I知 not going to build a monster truck for them.
They are off a BBC 454 and are truly made upside down (the spark plug cutouts are on the bottom side). Any ideas who would have a use for them?
They are off a BBC 454 and are truly made upside down (the spark plug cutouts are on the bottom side). Any ideas who would have a use for them?
#3
Gold Member
Gold Member
Join Date: Jan 2011
Location: Syracuse, NY
Posts: 1,097
Likes: 0
Received 0 Likes
on
0 Posts
Generally upside down headers are pretty exclusively a mudder application. As I'm sure you know, they go up through the hood. They actually are worth a few $$$ to the right person.
#5
Commonly called "Zoomies"
Mud trucks, crawlers/rock climbers, and demo derby cars use them. I have a couple sets of SBF sets for my derby cars. I've seen them with mufflers and flappers on them, which could be what the flange is for. Some of the race boats run them and are called "Tractor Pipes" on the boats usually.
You can probably sell them on eBay. That's where I've bought mine.
Mud trucks, crawlers/rock climbers, and demo derby cars use them. I have a couple sets of SBF sets for my derby cars. I've seen them with mufflers and flappers on them, which could be what the flange is for. Some of the race boats run them and are called "Tractor Pipes" on the boats usually.
You can probably sell them on eBay. That's where I've bought mine.
Last edited by Sydwayz; 12-19-2011 at 03:20 PM.
#10
Registered
Thread Starter
Fixx, Not on my boat. lol