Wellcraft Excaliber
#5
Registered
Get it surveyed...........
#6
Registered
Join Date: Jan 2004
Location: carolina shores
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
got one and gutted it and added bulk heads but when done ran real good if you can find yourself a 27 activator its a modern 27 excalibur and a serious fast rough water boat
#7
Gold Member
Gold Member
Thread Starter
Join Date: Jan 2011
Location: Syracuse, NY
Posts: 1,097
Likes: 0
Received 0 Likes
on
0 Posts
@texoma, its a sub 5K boat, maybe as low as 4K if she runs decent and passes a visual inspection, I'm not sure a survey is worth time/money in this case.
#9
Registered
I'd survey the motor as well - leak down and compression test should be easy on that big single engine boat.
#10
Registered
VIP Member
I had a 1982 rerigged it with a 540 640 hp and did a bravo in it and set the drive height at 19 inches.. Boat ran 85mph all day every day... best I ever went was 87....that hull is a great hull and awesome in the ruff stuff for it's size.Great boat cockpit is a little small because of the 7ft beam but all in all good boat..
Last edited by excalibur82; 12-21-2011 at 01:08 PM.