700 sci or 525 camshaft
does anyone have the crane part # for 700 sci camshaft, the 525 , or the 500 EFI
Thanks Joe |
The camshaft in the 700SCI is the same cam that is in the 500EFI if that helps. This according to article by Bob Teague in Power Boat mag last year.
|
Thanks for reply, I would of never thought that.
|
The 525EFI cam is a Crane 168741 that is ground with a 114 lob sep instead of the standard 112.
Standard 168741 specs http://www.cranecams.com/product/car...detail&p=24283 |
Like stated above, the Merc 500EFI and 700SCI use the same cams #169621: .598/.610 lift, 230/236 duration @ .050, 114 lobe.
The 525EFI uses #16-HR00004: .610/.632 lift, 236/244 duration @ .050, 114 lobe. The 525EFI cam is generally the same as the 168741 (gen VI) or the 139741 (Mark IV) but with a 112 lobe. Great top end cams for blower or bigger naturally aspirated BBC engines. If anyone needs cams or advise, give us a call, we have them all on the shelf and can help with any questions. -Eric |
All times are GMT -5. The time now is 10:55 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.