700 sci or 525 camshaft
#1
Registered
Platinum Member
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Fort Erie Ontario Canada
Posts: 521
Likes: 0
Received 1 Like
on
1 Post
700 sci or 525 camshaft
does anyone have the crane part # for 700 sci camshaft, the 525 , or the 500 EFI
Thanks Joe
Thanks Joe
Last edited by JMPH; 01-07-2012 at 09:40 AM.
#4
Charter Member # 55
Charter Member
The 525EFI cam is a Crane 168741 that is ground with a 114 lob sep instead of the standard 112.
Standard 168741 specs http://www.cranecams.com/product/car...detail&p=24283
Standard 168741 specs http://www.cranecams.com/product/car...detail&p=24283
#5
Offshoreonly Advertiser
Offshoreonly Advertiser
Like stated above, the Merc 500EFI and 700SCI use the same cams #169621: .598/.610 lift, 230/236 duration @ .050, 114 lobe.
The 525EFI uses #16-HR00004: .610/.632 lift, 236/244 duration @ .050, 114 lobe.
The 525EFI cam is generally the same as the 168741 (gen VI) or the 139741 (Mark IV) but with a 112 lobe. Great top end cams for blower or bigger naturally aspirated BBC engines.
If anyone needs cams or advise, give us a call, we have them all on the shelf and can help with any questions. -Eric
The 525EFI uses #16-HR00004: .610/.632 lift, 236/244 duration @ .050, 114 lobe.
The 525EFI cam is generally the same as the 168741 (gen VI) or the 139741 (Mark IV) but with a 112 lobe. Great top end cams for blower or bigger naturally aspirated BBC engines.
If anyone needs cams or advise, give us a call, we have them all on the shelf and can help with any questions. -Eric
The following users liked this post:
OPS VZLA (09-23-2020)