Drive questions Teague/Imco/Bmax
09-24-2012 | 04:37 PM
#231
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
When I sold my IMCO Extreme SC's a number of years ago, they sold quickly despite the issues I and others were having.
Glad to hear the SCX's are working out, that's great feedback.
Frank
09-24-2012 | 06:59 PM
#232
Registered
Joined: Dec 2011
Posts: 262
Likes: 0
From: Gunnison Co
I made the switch to the Imco SCX's. I have a set of Zul's in a big heavy boat and so far so good! I did however have some paint flake off the drive which I am not to happy about but other then that it has been good. I have only run them for roughly 50 hours but I have been out in some big water a few times running at a good speed. For me I did not want to have to baby the drives it would have defeated the purpose of the boat. I am going to be doing another oil change on them so stay tuned. Also for me I went Imco for the ease of putting them on and resale. I talked to quite a few people and they all had said they felt that the boat would be more attractive to buyers with the Imco's vs staying Bravo or going another route.
09-24-2012 | 08:29 PM
#233
Platinum Member
Joined: Sep 2004
Posts: 1,989
Likes: 707
From: Santa Clarita CA
You have to change the helmet but use the same gimbal ring ,I replaced mine with new ones
I just put on scx drives. My bravos were fine but wanted the piece of mind
It cost me 33k for everything plus sold my bravos for 10k
So it's not cheap but breaking bravos isn't either
This weekend in Florida will be test
I just put on scx drives. My bravos were fine but wanted the piece of mind
It cost me 33k for everything plus sold my bravos for 10k
So it's not cheap but breaking bravos isn't either
This weekend in Florida will be test
