Offshoreonly.com - First engine run (vid) - exhaust reversion help needed!

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - First engine run (vid) - exhaust reversion help needed! (https://www.offshoreonly.com/forums/general-boating-discussion/273997-first-engine-run-vid-exhaust-reversion-help-needed.html)

Just for info, those risers needed about 6 inches of rubber hose to connect with the thru hulls in the transom on a standard bravo setup. Here is a pic of one set in my new boat.

Quote:

Originally Posted by Ted G (Post 3659010)

Just for info, those risers needed about 6 inches of rubber hose to connect with the thru hulls in the transom on a standard bravo setup. Here is a pic of one set in my new boat.

Wow those look nice, how's the condition of the remaining set? Can you shoot me an email to alex @ athomasphoto (.) com with an offer? I talked to SMI the other day - they were really helpful with the spec sheet that I'm going to fill out.

I do work at a fabrication shop so worst case I'll just extend them myself, but it's all about time. :whistle: