Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   GPS Speedo (https://www.offshoreonly.com/forums/general-boating-discussion/274326-gps-speedo.html)

Ptufaro 04-12-2012 01:56 PM

GPS Speedo
 
1 Attachment(s)
I have a Livorsi GPS speedo that the antenna stopped working. Has anyone bought the new style antenna and done the conversion yourself? I can send it back to Livorsi and they will convert it but I am trying not to have to take it out the boat.

It seems simple enough mine has 3 wires that plug in.

The newer style has 3 wires that go to ring terminals
Wire Connection
White Signal (NMEA 0183 output)
Red Switched 12V power
Black Good engine ground.

If I cut the ring terminals off and solider in my connector it should work. Anyone try this before and if so what stumbling blocks did you reach?

DCB F32 04-12-2012 02:09 PM

Tried it, did not work.

Some units need to be programmed to work with the new antenna.

It is really easier to just send it in.

1 MAIDEN AMERICA 04-12-2012 02:17 PM

I peeled(glued on) the antenna (mine looked like a mouse)off the deck, cut it apart with a razor at the seam, unplugged the harness, unsoldered the ground, put it on the bench, unsoldered the inner cover and battery, soldered in a new $3.00 battery and put it all back together with 3M5200. Works great.

SFOcean 04-12-2012 05:42 PM


Originally Posted by 1 MAIDEN AMERICA (Post 3662216)
I peeled(glued on) the antenna (mine looked like a mouse)off the deck, cut it apart with a razor at the seam, unplugged the harness, unsoldered the ground, put it on the bench, unsoldered the inner cover and battery, soldered in a new $3.00 battery and put it all back together with 3M5200. Works great.

I did this also; did not work, but I have the molex plug version also. Battery is now good, looks for satellites for a few seconds then the needle goes back to 9 o'clock and stays there. Guess the antenna, gauge and all wiring will have to be sent to Livorsi.

mcprodesign 04-12-2012 06:42 PM

Unscrewed the top on mine. Desoldered the battery. Got a new 3 dollar battery had the terimnals welded on it and put it back together.. No worky, But Livorsi said for about a 180 bucks, I can buy the new antenna.( Just so you can tell how fast you are going.) WOOPIE! I used my hand held and recoreded speeds by the tach. So at 3000- 3500 hundred etc., I can tell about how fast I am going by the tach. It's about 500 RPMs per 10 MPH on my boat. That's good enough for me.. When I test I just use the hand held. :D

Ptufaro 04-12-2012 08:34 PM

Thanks for the info
I will attemt to change the battery in the antenna. If that does not work I'll send the gauge in.

Wildman_grafix 04-12-2012 08:39 PM

I just bought a garmin antena with the nema output and hooked it up.

Works great.

mwdill 04-12-2012 10:09 PM

unplugged mine from behind the speedo and works (for now)

flying J 04-12-2012 11:36 PM

What a horrible design! I think everyone has been down this road. I expect more from a company like Livorsi. Did they think these stupid batteries would last forever? Every weekend at the lake someone is talking about their speedo doing this!

Dave M 04-13-2012 07:08 AM

Why not just wire the gauge up to your gps? Throw the antenna in the garbage.


All times are GMT -5. The time now is 09:03 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.