Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   How do I polish my lowre units & props? (https://www.offshoreonly.com/forums/general-boating-discussion/27508-how-do-i-polish-my-lowre-units-props.html)

Hauling Trash 06-27-2002 09:00 PM

I use on-off on the prop and wet sand the drives

Uncle Toys 06-27-2002 09:59 PM

Thanks guys, that’s great info. I bought some Lime Away, but what kind of brush do you use? Do you just spray some on and brush the stainless? In the next couple of days I will get over to the Home Depot and get the buffing wheel and compound set – thanks Intolerant1. Wild Horses, I was wondering when that would come out :)

cat n around 06-27-2002 10:46 PM

Wet sand with 600 grit then with 1000 grit then 2000 grit then hand rub with mothers mag and wheel chrome polish,I did mine tonight it looks much better

pullmytrigger 06-27-2002 10:58 PM

AUTOSOL........15 minutes........just make sure you put a coat of wax on afterwards or it will get some white deposits on it when water hits it then dries............Doug

pullmytrigger 06-27-2002 11:05 PM

I used Autosol on the air conditioning reciever/drier tank under the hood of my 88 full sized Blazer and had it polished to chrome in a half an hour just using a rag and some elbow grease, my buddies couldnt believe it........Doug


All times are GMT -5. The time now is 03:55 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.