Originally Posted by sleev-les (Post 3684982)

i have a cut down ski pole for mine.. I use it for snowboarding... Always gets some cool angles with the stick...

Originally Posted by befu (Post 3685046)

Good views. I am curious, how long was the pole?

Brian

Originally Posted by In2Deep (Post 3685023)

Great idea

Originally Posted by befu (Post 3685046)

Good views. I am curious, how long was the pole?

Originally Posted by Keytime (Post 3685283)

D*mn. Kinda personal, huh?

Excellent work! I was going to use the same idea on the harbor hop with the waterproof enclosure on my ContourHD and bring the camera up out of the water as the boats idled by.

Nice job!

Another idea is to use a boat hook (which is nice to leave on a boat anyway) and clamp the camera to it: http://www.westmarine.com/webapp/wcs...classNum=50356

Originally Posted by blefever (Post 3685351)

The West Marine boat hook is what I use.

Originally Posted by skydog (Post 3685387)

Nice i have Go Pro 2 it rocks!! How are you guys up loading? Mine took like 6 hours and did not work? Mine is set to 1080p thank you

Originally Posted by Keytime (Post 3685375)

Sorry for the brainfart. You did say boat hook. I had a case of head-up-arse on that one. :angry-smiley-038:

I can see editing the hook out of the scene if so desired, too. The GoPro suction-cupped to the deck with crappy sound is getting pretty old. Need more innovative ideas like this for sure. I'm considering buying a separate digital audio recorder to mix with because these cameras aren't picking up the great engine sounds of these boats too well, and that really enhances video quality, IMO.

Originally Posted by blefever (Post 3685725)

Yea, I can see editing the pole out too. Camera angle on the end of the pole and how you hold it will help.

As for the sound, I found with the open back it's not too bad if the camera is looking forward. Check out this short video shot from my BBQ mount with the open back. The Hero 2 has a jack for an external mic. I haven't tried it yet but will soon. Should be able to put a mic where ever you want.

http://youtu.be/vTJt32JHdPc

Originally Posted by blefever (Post 3685075)

Brian, It's a West Marine boat hook, I think they have two or three different lengths. Mine is 8 feet, about $25. They are adjustable so that's handy too. Go Pro has a tripod mount that is a 1/4-20 thread. I just drilled one hole in the end of the hook and attached the tripod mount.

I'll be posting more video from the street party at Desert Storm shot with this same deal.

Originally Posted by TW720HVY (Post 3686016)

Freaking awesome!!! :evilb:

I am having a hard time visualizing the mounting. Can you post or PM me a picture? Thanks.

Originally Posted by blefever (Post 3685700)

You can shoot in 1080 then downgrade to up load faster.

I use Windows movie maker.

When you save the finished movie, movie maker gives you choices for how you save the project. 1080 will take longer to upload but look better. I use 480p and it looks fine for viewing on a computer.

I've had trouble uploading to directly OSO so that's why I put it on You Tube then link to it.

Thanks everyone for the nice words.

Originally Posted by blefever (Post 3686115)

This should give you everything you need to make one for yourself. The Go Pro mount is from Go Pro. It's a tri-pod mount. As you can see the boat hook is from West Marine. I cut off part of the end because it was in the way sometimes. You can see in the photos where it was cut.

I will be posting more from Desert Storm of the street party. It was very handy for the big cats on tilt trailers to get up close footage.

Thanks again everyone for the nice comments.

Originally Posted by FREEDOM US1 (Post 3686288)

Really cheap helicopter !! Great idea!!!